Oase BioPlus 30 PPI Blue Filter Foam (46656)
| Brand | |
|---|---|
| Product type | Filter foam |
| Pore density | 30 PPI |
| Colour | Blue |
| Compatible filter | BioPlus 50, BioPlus 100, BioPlus 200, BioPlus Thermo 50, BioPlus Thermo 100, BioPlus Thermo 200 |
| Manufacturer article | 46656 |
| Net weight | 0.002 kg |
Blue 30 PPI replacement foam for BioPlus and BioPlus Thermo 50, 100 and 200. Oase article 46656; filter and other media sold separately.
Representative replacement-foam photograph; packaging is not shown.
£4.69 (inc VAT)
The Oase BioPlus 30 PPI blue filter foam is replacement article 46656 for the BioPlus and BioPlus Thermo internal-filter ranges. Its stated pore density and article number help you choose the correct foam stage, rather than relying on the colour of a photograph.
Check the model and foam grade
Oase lists this foam for BioPlus 50, 100 and 200 and BioPlus Thermo 50, 100 and 200. Match your filter’s model label before ordering, then compare the media article number with the foam stage you intend to replace.
This is the 30 PPI blue foam, not the 20 PPI article 45263 or the carbon foam set 48024. PPI means pores per inch and describes the foam’s nominal pore density. The grade is not an aquarium-capacity rating or a percentage of filtration improvement. Different media grades should be selected for their intended position, not treated as identical spares.
A practical replacement for routine maintenance
Foam catches suspended debris within the filter’s media arrangement. Correct seating matters: a damaged, misshapen or incorrectly positioned replacement can interrupt the intended route through the media. Keep the remaining filter parts clean and inspect the intake and outlet if water movement has reduced.
Use this article to renew the specified foam stage. Do not assume replacing foam alone will solve every water-quality problem; feeding, aquarium load, circulation and the rest of the filter still need attention. Check the aquarium and the filter together during routine servicing.
Care without unnecessary disruption
Disconnect the aquarium electrical equipment before handling the filter; isolate a Thermo model’s heater as well. Follow the BioPlus instructions to remove the foam. Rinse reusable established foam gently in water removed from the aquarium, without detergent, and replace it when worn or no longer serviceable.
When several established foams are due for renewal, replace them in stages where the filter’s instructions allow. Oase’s general care guidance explains that the established microorganisms live on the media, so changing every surface at once can disrupt biological activity.
Technical overview
| Detail | Specification |
|---|---|
| Manufacturer | Oase |
| Article | 46656 |
| Media | Blue filter foam |
| Pore density | 30 PPI |
| Compatible range | BioPlus / BioPlus Thermo 50, 100 and 200 |
| Net weight | 0.002 kg |
| Filter included | No |
What is included and related media
This is replacement blue filter foam article 46656. The BioPlus filter, pump, heater and other media are separate products. The filter’s model number and the replacement article are the selection references; the foam is not a complete internal filter.
For another media stage, compare the Oase BioPlus 20 PPI foam 45263 and BioPlus carbon foam set 48024. These are separately selected media with different specifications, rather than extra pieces promised with this foam.
Common questions
Is 30 PPI the same as 20 PPI?
No. These are different pore-density grades. Order the article specified for the media stage in your filter.
Does it include a BioPlus Thermo heater?
No. This replacement foam does not include a filter, pump or heater.



Reviews
There are no reviews yet.