Oase BioPlus 20 PPI Blue Replacement Filter Foam

SKU: 45263
Brand

Manufacturer SKU

45263

Foam grade

20 PPI

Colour

Blue

Compatibility

BioPlus and BioPlusThermo 50/100/200

Oase 20 PPI replacement filter foam for BioPlus and BioPlus Thermo 50, 100 and 200 internal aquarium filters. Replacement media only; the filter is not included.

£4.92 (inc VAT)

Replacement media for an Oase BioPlus filter

The blue 20 PPI foam is replacement media for Oase BioPlus and BioPlus Thermo internal aquarium filters. It catches particles as water passes through and provides a surface where beneficial filtration bacteria can establish. This is the 20 PPI blue foam, Oase article 45263, rather than the separately listed 30 PPI foam or white fleece. PPI means pores per inch and describes the foam’s nominal pore density; choose the grade specified for the media position in your filter.

Oase lists this media for all three standard sizes—BioPlus 50, 100 and 200—and their BioPlus Thermo 50, 100 and 200 equivalents. Check the name on the filter itself rather than selecting from the aquarium volume alone. It is a BioPlus part; do not assume it fits BioCompact or FiltoSmart filters.

Choosing and fitting the right material

If you are replacing a different stage, check the original media and filter instructions before ordering. The white BioPlus fleece, article 45264, is a separate fine-filtration product; neither the fleece nor a complete filter is included with this foam.

Disconnect the aquarium electrical equipment before removing a media module. Open the filter as shown in the supplied instructions, identify the correct stage and install the replacement in its proper position. Reassemble the module securely and check that water is circulating after the power is restored. Follow the current product and filter instructions if the arrangement differs from an illustration.

Care for established filtration

Filter media support more than the appearance of the water: mature media carry bacteria that help process waste. Avoid replacing every established element at the same time unless there is a specific reason. Stagger changes where practicable and retain usable mature media so the biological filter has time to recover.

Rinse reusable established foam gently in water removed from the aquarium, without detergent. Replace worn or damaged foam, or follow the manufacturer’s advice when cleaning no longer restores useful flow. Inspect the media regularly rather than assuming the same replacement interval will suit every aquarium.

Specifications and common questions

Specification Detail
Manufacturer / article Oase / 45263
Media type 20 PPI replacement filter foam
Colour Blue
Compatible standard filters BioPlus 50, 100 and 200
Compatible heated filters BioPlus Thermo 50, 100 and 200
Complete filter included No

Does it fit the Thermo models? Yes. Oase lists the Thermo 50, 100 and 200 as well as the three standard BioPlus sizes.

Is the aquarium filter included? No. This listing is for BioPlus 20 PPI replacement foam; the filter, pump and other media are separate.

Explore more aquarium equipment and accessories.

Oase BioPlus 20 PPI Blue Replacement Filter Foam Reviews

Reviews

There are no reviews yet.

Be the first to review “Oase BioPlus 20 PPI Blue Replacement Filter Foam”