Oase BioMaster 20 PPI Blue Filter Foam (45269)

SKU: 45269
Brand

Manufacturer article

45269

Foam type

Filter foam

Foam grade

20 PPI

Colour

Blue

Compatible series

BioMaster, BioMaster Thermo, BioMaster², BioMaster² Thermo

Compatible sizes

250, 350, 600, 850

Approx. net weight

0.03 kg

Oase 45269 blue 20 PPI BioMaster filter foam. A separate filter-stage article for the named legacy and BioMaster² standard and Thermo models, sizes 250, 350, 600 and 850. Match the part number and filter stage before ordering.

£7.00 (inc VAT)

Oase article 45269 is a blue 20 PPI main filter foam for the named BioMaster aquarium filters. Use it to renew the media in the main filter-media stage without replacing the whole filter.

Check your BioMaster model and quantity

Oase lists compatibility with BioMaster and BioMaster Thermo, and the newer BioMaster² and BioMaster² Thermo, in sizes 250, 350, 600 and 850. Check the full filter name and part number, then match the filter stage and grade you intend to replace. Other filter families need their own matched spares.

Match the replacement to the main filter stage and check your filter’s parts list and the product packaging for the quantity required.

Choosing the foam grade

This blue 20 PPI article belongs to the main filter-media stage. The orange 30 PPI filter foam is article 45270; the separate prefilter foam sets are for the prefilter module.

PPI means pores per inch. It describes the stated foam grade, not an exact micron rating or a guarantee about filtration performance. Choose the grade recommended for your setup and check the article number rather than relying on colour or PPI alone.

Foam helps catch suspended debris and also provides a surface for beneficial bacteria. Filter care and water-quality checks remain important; a new foam is not a substitute for the rest of the filtration system.

Fitting and maintenance

Disconnect aquarium electrical equipment before reaching into the water or opening the filter. If a heater is fitted, isolate it and allow it to cool as directed before servicing. Remove and refit the media in the position shown in the exact filter manual; do not rely on a similar-looking part from a different filter.

Inspect established foam as part of routine filter care. When it remains usable, rinse it gently in water removed from the aquarium, without soap or detergent. Replace worn foam as needed, and where practical avoid replacing every established biological surface at once. Reassemble carefully, check for leaks and confirm normal circulation.

Technical overview and supplied article

Detail Specification
Manufacturer Oase
Manufacturer article 45269
Foam type Filter foam
Foam grade 20 PPI
Colour Blue
Compatible series BioMaster, BioMaster Thermo, BioMaster², BioMaster² Thermo
Compatible sizes 250, 350, 600, 850
Approx. net weight 0.03 kg

The supplied item is blue 20 PPI main filter foam (article 45269) for the stated grade. The filter, heater, prefilter housing, other grades and separate biological media are not included. The approximate weight in the table is the manufacturer’s net figure for the named article, not a packed shipping weight.

Common questions

Does it fit the original BioMaster as well as BioMaster²?

Oase lists the BioMaster, BioMaster Thermo, BioMaster² and BioMaster² Thermo in sizes 250, 350, 600 and 850. Match the exact article and stage to your filter.

Is this the prefilter foam?

No. Article 45269 is a blue 20 PPI main filter foam. The prefilter sets are listed separately.

Should I change all established media at once?

Where the filter contains several established foams or other biological media, Oase’s general guidance favours changing media incrementally to help retain the established bacteria. Follow your filter’s instructions.

Browse aquarium filter media and compare external aquarium filters. Check each listing’s stated model, grade and pack quantity.

Oase BioMaster 20 PPI Blue Filter Foam (45269) Reviews

Reviews

There are no reviews yet.

Be the first to review “Oase BioMaster 20 PPI Blue Filter Foam (45269)”