NT Labs Optimus
| Size | 10ml, 100ml, 250ml, 500ml |
|---|---|
| Brand | |
| Treatment Type | Dechlorination and water purification |
| Target Problem | chloramine, Chlorine, tap water contaminants and heavy metals |
| Product Form | Liquid / pond treatment |
| Seasonal Use | Year round / Water changes |
| Treatment Purpose | Tap water conditioning and dechlorination |
Concentrated tap water conditioner for ponds and freshwater or marine aquariums. Removes chlorine and chloramine and detoxifies heavy metals. Choose 10ml, 100ml, 250ml or 500ml and follow the current label for dosing.
Price range: £2.49 through £20.81 (inc VAT)
NT Labs Optimus Water Conditioner
Concentrated dechlorinator for water changes, new setups and pond top-ups
NT Labs Optimus prepares tap water for fish by removing chlorine and chloramine and detoxifying heavy metals. This concentrated liquid conditioner is suitable for freshwater and marine aquariums, and NT Labs also provides guidance for pond use. It is useful whenever mains water is introduced: during a new installation, a partial water change or a routine top-up. Choose the bottle size around the amount of replacement water you normally prepare.
Optimus also provides temporary support when ammonia, nitrite or nitrate levels are elevated. NT Labs explains that its conditioning action gives the biological filter time to process the waste. That makes it a useful companion to a functioning filter and an appropriate maintenance routine. Continue testing the water and investigating the cause of an abnormal result, even when a conditioner has been added.
Choosing your bottle size
The available sizes are shown in the selector above. A small bottle can be convenient for a compact aquarium or an occasional small water change; larger bottles are more practical for regular pond maintenance or several systems. Check the quantity needed for your usual routine before choosing. The amount printed on the bottle is concentrated product, so it should not be confused with the volume of water being treated.
Keep enough conditioner available for an unplanned water change as well as scheduled maintenance. If several people care for the same pond or aquarium, record the water volume and the amount normally measured. A simple written routine helps avoid dosing the same water twice or assuming that a capful from one product is equivalent to a capful from another.
Preparing new water
For a new system, establish the actual water volume before dosing. The working volume can differ from the advertised capacity once substrate, rocks and other fittings are in place. External filters and pipework may also hold water. Use the best practical measurement available and keep that figure with your equipment records so that future water changes can be calculated consistently.
For partial changes, NT Labs recommends conditioning the replacement water before it enters the system where possible. Measure the new water being added and follow the directions for that volume. A container used only for aquatic maintenance makes preparation easier and avoids residues from household cleaning products. Check the replacement water’s temperature and, in marine systems, salinity as part of the same routine.
Measuring Optimus accurately
Use the current bottle instructions for your pond or aquarium and the particular water conditions. NT Labs publishes separate pond and aquarium guidance, so select the appropriate instructions when using its online calculator. A purchasing calculator helps estimate how much product to buy; it cannot measure the displaced water or identify the chlorine and ammonia levels in your installation.
Small replacement volumes may require less than a capful. Measure with suitable equipment rather than estimating a small amount by eye. The manufacturer gives approximately 5ml as a capful and approximately 1ml per cap thread, but a graduated measure is useful where accuracy at small quantities matters. Retain the label and check it whenever changing bottle size or moving between systems.
Optimus and biological filtration
Use Optimus alongside NT Labs Satus when both water conditioning and biological filter support are needed. Optimus deals with the incoming water; Satus supplies organisms intended to help establish and support the biofilter. NT Labs recommends the combination during setup and maintenance, with each product measured according to its own directions.
The manufacturer describes ammonia binding as temporary, with the ammonia remaining available for beneficial bacteria to process. It does not mean that the cause of excess waste has disappeared. Review feeding, stocking, filter operation and the condition of the biological media if a problem persists. Maintain appropriate aeration and circulation throughout normal operation.
Water testing after conditioning
Keep a record of ammonia and nitrite readings during a new filter’s establishment and after significant maintenance. Clear water alone does not confirm that those levels are suitable for fish. Record when Optimus was added alongside the test result, particularly if you are comparing measurements taken before and after a water change.
NT Labs advises that Optimus can temporarily affect liquid salicylate ammonia tests, reducing colour formation for around 24 hours after dosing. Check the instructions for your test method when interpreting a result. If the reading and the condition of the fish do not agree, investigate further instead of relying on water appearance or one test in isolation. Our water test kits provide options for routine monitoring; check suitability for your freshwater or marine system.
Special conditions and other treatments
The manufacturer provides conditional dosing guidance for unusually high chloramine, high temperatures and emergency water-quality problems. Those directions should be used for the relevant circumstances rather than adopted as an everyday routine. Follow the label and seek advice if you are unsure what is causing an abnormal reading. Adequate aeration remains important, especially during hot weather or when fish are distressed.
NT Labs advises against using Optimus during medication treatments because interactions may occur, with normal conditioning resumed at the next water change. Check both products’ instructions when planning a treatment course. Its FAQ states that UV sterilisers do not affect Optimus, although the separate instructions for Satus require a temporary UV pause when that product is used.
Storage and everyday handling
Keep Optimus in its original labelled bottle, closed between uses and stored as directed on the packaging. NT Labs notes that a sulphurous smell can develop without affecting performance. Keep aquatic products separate from household chemicals and out of reach of children. A clearly labelled measure and a short maintenance record make this concentrated conditioner straightforward to use consistently.



Reviews
There are no reviews yet.