Interpet NeoAir Midi Aquarium Air Pump
| Brand | |
|---|---|
| Aquarium guide | Up to 50 litres |
| Rated airflow | 45 L/h |
| Size H x W x D | 9 x 5.5 x 4cm; without cable or plug |
| Included | Pump, cradle, suction cup and plug |
Interpet NeoAir Midi is a compact air pump for small and nano aquariums up to 50 litres. Its electrical oscillation design operates without a replaceable diaphragm, while a fixing cradle, suction cup and rubber feet allow flexible positioning outside the tank.
One NeoAir Midi pump with fixing cradle, suction cup and plug is supplied. The stated contents do not include airline, airstones, check valve, splitter, connectors or a cabinet fixing screw. Plan those parts around the layout you will actually install.
£31.25 (inc VAT)
Interpet NeoAir Midi is a compact air pump for small and nano aquariums up to 50 litres. Its electrical oscillation design operates without a replaceable diaphragm, while a fixing cradle, suction cup and rubber feet allow flexible positioning outside the tank.
Choosing and comparing
The Midi is the higher-output choice in the two-model NeoAir range. Interpet’s feature guide is two 1-inch airstones. Treat that as guidance for choosing a modest air system, not as a promise that two stones or a splitter are supplied. The actual result depends on the airline arrangement, diffuser resistance and operating depth.
The Mini is guided for aquariums up to 25 litres and one small stone, so it is worth comparing if your aquarium and air feature are smaller. For a setup needing two separate pump outlets, compare the twin-outlet Aqua Air AP3.
Technical overview
| Detail | Specification |
|---|---|
| Model | Midi |
| Maker code | 51537 |
| Aquarium guide | Up to 50 litres |
| Rated airflow | 45 L/h |
| Size H x W x D | 9 x 5.5 x 4 cm; without cable or plug |
| Product weight | 0.1 kg |
| Placement | Indoors, dry and outside the aquarium |
| Included | Pump, cradle, suction cup and plug |
What is supplied
One NeoAir Midi pump with fixing cradle, suction cup and plug is supplied. The stated contents do not include airline, airstones, check valve, splitter, connectors or a cabinet fixing screw. Plan those parts around the layout you will actually install.
Positioning and installed airflow
Keep the pump and its power supply dry and positioned so neither can fall into the aquarium. Make a drip loop in the mains cable and fit a check valve in the airline to prevent back-siphoning, following the supplied instructions. The suction fitting is for mounting on the outside; it is not permission to immerse the pump. Keep airline runs as short and direct as practical without stretching them or creating kinks.
A catalogue airflow is not a guaranteed reading after installation. Longer tubing, deeper water and a more restrictive air feature change the load on the pump. Compare a complete setup rather than expecting the same bubble pattern from every airstone.
Care and checks
The maker describes this pump as maintenance-free, but the connected air system still needs care. If bubbles reduce, inspect tubing, check valves, connectors and the airstone for kinks or blockage before assuming the pump has failed. Replace a blocked or deteriorated stone as directed; a diffuser that creates excess back pressure can affect performance. Do not use a pump or power supply that has become wet or damaged. There is no replacement diaphragm to schedule for NeoAir; Aqua Air diaphragm kits are not compatible service parts for this design.
Questions before choosing
Are two airstones supplied?
No. Two small airstones are the manufacturer’s running guide, not the box contents. Airline, stones and any required connections are separate.
Is the Midi a submersible pump?
No. It is an external, dry aquarium air pump. Use the supplied mounting options only as instructed and keep both pump and power supply away from water.




Reviews
There are no reviews yet.