Interpet Aqua Air AP1 Aquarium Air Pump
| Brand | |
|---|---|
| Aquarium guide | 21–50 litres; manufacturer selection guide |
| Rated airflow | 120 L/h |
| Power | 2.5W |
| Air outlets | 1 |
| Size H x W x D | 6.5 x 10.0 x 6.0cm |
Interpet Aqua Air AP1 is a single-outlet diaphragm air pump for an aquarium air feature or an appropriately matched air-powered filter. The manufacturer’s selection guide places this model in the 21–50 litre aquarium range. Airline and airstone are not included.
One Interpet Aqua Air AP1 pump and an instruction leaflet are supplied. Airline, airstone, check valve, valves and connecting pieces are separate. If you want to run more than one feature from this single outlet, choose a suitable air distribution arrangement rather than assuming extra outlets are built into the pump.
£18.72 (inc VAT)
Interpet Aqua Air AP1 is a single-outlet diaphragm air pump for an aquarium air feature or an appropriately matched air-powered filter. The manufacturer’s selection guide places this model in the 21–50 litre aquarium range. Airline and airstone are not included.
Choosing and comparing
Its rated airflow is 120 litres per hour in Interpet’s Aqua Air manual, with a 2.5 W electrical rating on the product page. These figures describe different things: watts describe electrical input, while the airflow rating describes the pump’s nominal air output. Neither is a guarantee of a particular bubble pattern after tubing and a diffuser are fitted.
The AP Mini Complete includes airline and airstone but has a lower 60 L/h rating. AP2 remains a single-outlet design and steps up to 210 L/h. AP3 is the twin-outlet option. Pick the model and the air feature together rather than assuming every stone, ornament or filter has the same resistance.
Technical overview
| Detail | Specification |
|---|---|
| Model | AP1 |
| Maker code | 2501 |
| Aquarium guide | 21–50 litres; manufacturer selection guide |
| Rated airflow | 120 L/h |
| Power | 2.5 W |
| Air outlets | 1 |
| Size H x W x D | 6.5 x 10.0 x 6.0 cm |
| Placement | Indoors, dry and outside the aquarium |
| Service kit | 2541; optional |
| Included | Pump and instructions |
What is supplied
One Interpet Aqua Air AP1 pump and an instruction leaflet are supplied. Airline, airstone, check valve, valves and connecting pieces are separate. If you want to run more than one feature from this single outlet, choose a suitable air distribution arrangement rather than assuming extra outlets are built into the pump.
Positioning and installed airflow
Keep the pump dry, indoors and on a stable surface. If positioned above the water level, the manual says it should not sit directly over the aquarium, where it could fall in. If placed below water level, fit a check valve near the pump outlet to prevent back-siphoning. For marine use the maker recommends above-water positioning and a check valve. Follow the supplied electrical safety and installation directions.
Care and checks
Inspect the airline, connections and air features regularly. Reduced bubbles can come from a kink, leak or blocked stone rather than a failed pump. The maker recommends replacing the air filter pad every three to six months, depending on the operating environment. Switch off and disconnect before maintenance and follow the service instructions for this exact model. Check that the pump sits securely on its feet if vibration becomes noticeable.
Questions before choosing
Is airline supplied with AP1?
No. AP1 is the pump-and-instructions article. The AP Mini Complete includes airline and an airstone.
Which service kit fits AP1?
Interpet lists annual maintenance kit 2541 for AP1 and AP2. Follow the kit and pump instructions; AP Mini and AP3 use different listed kits.




Reviews
There are no reviews yet.