Interpet Aqua Air AP2 Aquarium Air Pump

SKU: IP2502
GTIN: 755349025022
Brand

Aquarium guide

51–100 litres; manufacturer selection guide

Rated airflow

210 L/h

Power

4W

Air outlets

1

Size H x W x D

7.6 x 10.6 x 7.1cm

Interpet Aqua Air AP2 is a single-outlet diaphragm air pump in the manufacturer’s 51–100 litre aquarium selection band. It is supplied as a pump article without airline or airstone, so you can choose the air feature and connecting parts to suit the aquarium.

One AP2 pump with plug and an instruction leaflet are supplied. Airline, airstones, a check valve and any air-distribution connections are separate. Match the downstream equipment to the flow required instead of using a restrictive fitting to force an unsuitable pump into a particular setup.

£21.86 (inc VAT)

Interpet Aqua Air AP2 is a single-outlet diaphragm air pump in the manufacturer’s 51–100 litre aquarium selection band. It is supplied as a pump article without airline or airstone, so you can choose the air feature and connecting parts to suit the aquarium.

Choosing and comparing

Interpet’s range manual gives AP2 a rated airflow of 210 litres per hour. The product page specifies 4 W electrical input. Installed airflow will depend on depth, tubing, connectors and diffuser resistance, so use the figures to compare models rather than as a guaranteed measurement at the airstone.

AP1 has a lower 120 L/h rating and the same single-outlet layout. AP3 changes to two outlets with a stated 2 x 180 L/h rating. A higher-flow single outlet and a twin-outlet pump offer different ways to arrange air features; AP2 does not acquire an extra physical outlet merely because its flow is higher than AP1.

Technical overview

Detail Specification
Model AP2
Maker code 2502
Aquarium guide 51–100 litres; manufacturer selection guide
Rated airflow 210 L/h
Power 4 W
Air outlets 1
Size H x W x D 7.6 x 10.6 x 7.1 cm
Placement Indoors, dry and outside the aquarium
Service kit 2541; optional
Included Pump and instructions

What is supplied

One AP2 pump with plug and an instruction leaflet are supplied. Airline, airstones, a check valve and any air-distribution connections are separate. Match the downstream equipment to the flow required instead of using a restrictive fitting to force an unsuitable pump into a particular setup.

Positioning and installed airflow

Keep the pump dry, indoors and on a stable surface. If positioned above the water level, the manual says it should not sit directly over the aquarium, where it could fall in. If placed below water level, fit a check valve near the pump outlet to prevent back-siphoning. For marine use the maker recommends above-water positioning and a check valve. Follow the supplied electrical safety and installation directions.

Care and checks

Inspect the airline, connections and air features regularly. Reduced bubbles can come from a kink, leak or blocked stone rather than a failed pump. The maker recommends replacing the air filter pad every three to six months, depending on the operating environment. Switch off and disconnect before maintenance and follow the service instructions for this exact model. Check that the pump sits securely on its feet if vibration becomes noticeable.

Questions before choosing

Does AP2 have two outlets?

No. The maker’s range diagram groups AP Mini, AP1 and AP2 as single-outlet models; AP3 and AP4 have twin outlets. The number in AP2 is a model identifier.

Can AP1 and AP2 use the same maintenance kit?

Interpet lists kit 2541 for both models. That identifies the service kit; it does not make their flow, power or physical dimensions identical.

Compare aquarium air pumps and water movement equipment.

Interpet Aqua Air AP2 Aquarium Air Pump Reviews

Reviews

There are no reviews yet.

Be the first to review “Interpet Aqua Air AP2 Aquarium Air Pump”