HIBLOW HP100

HIBLOW HP100

Large HIBLOW diaphragm air pump for koi ponds, aerated drains and bio chambers

HIBLOW HP100 is a 100 LPM linear diaphragm air pump for reliable pond aeration, koi pond oxygenation, air stones, diffuser discs and biological filter chambers. HIBLOW air pumps are well known for quiet running, oil-free airflow and long service life, making them a dependable option for ponds where aeration needs to run continuously.

Air pumps are a key part of many pond systems. They support fish health by improving dissolved oxygen, help biological filters process waste efficiently and can keep moving bed filter media in motion. The HP100 is best selected by looking at the depth of the pond or filter chamber, the number of air stones or diffuser discs being used and whether the pump will be running a bottom drain, filter chamber, pond diffuser or a combination of outlets.

This 100 LPM HP model is suitable for large aeration duties where a steady, low noise air supply is needed. It should be installed above water level where possible, protected from rain and flooding, and connected through suitable airline, non-return valves and manifolds so that airflow can be balanced properly.

Key features

• 100 LPM airflow for pond, koi pond and filter aeration
• Durable HIBLOW HP diaphragm pump design for continuous aeration
• Clean, oil-free air supply for ponds, filters and diffuser systems
• Quiet running design suitable for garden pond installations
• Useful for air stones, diffuser discs, aerated filter chambers and oxygen support
• Can be split through a suitable air manifold when multiple outlets are needed
• Best installed with non-return valves to protect against water backflow

Technical specifications

• Brand: HIBLOW
• Model: HP100
• Pump type: Linear diaphragm air pump
• Air output: 100 LPM
• Rated pressure: 17.7 kPa
• Maximum pressure: Use within manufacturer pressure curve
• Power consumption: 95 W
• Voltage: 220-240V
• Frequency: 50/60 Hz
• Noise level: 38 dB
• Dimensions: Check product label / manufacturer data
• Weight: 8.5 kg
• Warranty: 2 years

Installation and sizing guidance

For best results, place the air pump in a dry, well ventilated and weather protected location. It is normally better to position the pump above the pond water level. If the pump is lower than the water level, fit suitable non-return valves to reduce the risk of water running back down the airline and damaging the pump.

• Use the correct diameter airline for the airflow being produced.
• Use an air manifold if the pump is feeding more than one diffuser.
• Avoid excessive back pressure from blocked stones, restricted airline or deep installations.
• Check and clean inlet filters as part of routine maintenance.
• Do not allow the pump to sit where it can flood, overheat or draw in dirt.

As a general guide, larger diffuser discs and deeper ponds need more airflow and pressure than shallow air stones. If several outlets are being used, balance the airflow through a manifold rather than forcing all of the output through one small stone.

Related air pump products

Compare this model with neighbouring air pumps in the same range, or browse the airline and diffuser accessories needed to complete the installation.

• HIBLOW HP20
• HIBLOW HP40
• HIBLOW HP80
• HIBLOW HP200
• HIBLOW XP40 Low Wattage Air Pump
• Browse all pond air pumps
• Airline, manifolds and diffuser accessories
• oxygenation and aeration guide for koi ponds