Fluval Reef 4.0 46 W LED Aquarium Light, 88 to 126 cm
| Brand | |
|---|---|
| Tank fit | 88 to 126 cm |
| Rated power | 46 W |
| Control | FluvalConnect Bluetooth |
Fluval Reef 4.0 46 W for marine aquariums with a 88 to 126 cm fitting span. Programmable spectrum and daily light cycle through FluvalConnect.
£224.39 (inc VAT)
Fluval Reef 4.0 46 W is a programmable LED strip for a marine aquarium. The Reef 4.0 range uses full spectrum lighting with actinic channels and can be controlled through the FluvalConnect mobile app. This model fits a span of 88 to 126 cm and the manufacturer lists 2,250 lumens. This longer strip can sit over a reef with several islands of rock or a clear swimming space through the middle. Plan where you want to light both ends of the layout. Keep the power cable and support arms clear of a cover, a sump return or a top brace before you settle on the position.
Check the fit across your aquarium
The 46 W fixture body is approximately 88 cm long and the stated fitting span is 88 to 126 cm. Check the rim or installation points at each end and allow room to remove the cover without moving the light. Where a wider aquarium suits two Reef 4.0 sizes, compare the lit length and the clearance around the equipment.
Compare light at coral depth
Fluval gives published PAR reference values of 110 at 30 cm and 65 at 46 cm. Use the depth closest to your coral positions when comparing sizes. Surface movement, mounting position and rock ledges alter the light at each spot. Start with a manageable schedule and observe the aquarium as you adjust it.
Set up a daily light cycle
Use FluvalConnect over Bluetooth to set your schedule and adjust the colour channels. Establish a consistent daily cycle before you fine-tune the individual channels or add transitions. Where you already have a reef light, introduce changes steadily and check how the aquarium responds. Choose settings that suit the lighting needs and position of the corals you keep.
Installing and caring for the fixture
Follow the model manual for support, electrical connection and clearance above the aquarium. The fixture has an IP67 rating. Mount it above the water as shown in the instructions and route the cable safely, keeping the driver and its plug in an appropriate dry location. Wipe away salt deposits as directed by Fluval once the equipment is isolated.
Technical overview
| Specification | Details |
|---|---|
| Brand | Fluval |
| Manufacturer reference | 16907 |
| Aquarium type | Marine |
| Rated power | 46 W |
| Fitting span | 88 to 126 cm |
| Body size | 88 Ă— 6.4 Ă— 2.5 cm, approximately |
| Published output | 2,250 lm |
| Control | FluvalConnect over Bluetooth |
| Fixture rating | IP67 |
Common questions
Which Reef 4.0 model is this?
This is Fluval's article 16907. It has a fitting range of 88 to 126 cm, a 46 W rating and an approximately 88 cm body. The 59 W model has a longer body and starts at 110 cm.
What does the stated fitting span measure?
It refers to the published support span across the aquarium. The lamp body is about 88 cm long. Measure where the supports will actually sit and check nearby covers, braces and pipework.
How do I adjust the colour and schedule?
The FluvalConnect app controls the light's colour channels and timed cycle over Bluetooth. Check the app requirements for your device before fitting.
Can I compare output using wattage alone?
Use the fixture's published spread, PAR readings and fitting range alongside its 46 W rating. The output reaching a coral also depends on the depth, placement and shadows in the aquarium.




Reviews
There are no reviews yet.