Fluval Reef 4.0 32 W LED Aquarium Light, 59 to 89 cm
| Brand | |
|---|---|
| Tank fit | 59 to 89 cm |
| Rated power | 32 W |
| Control | FluvalConnect Bluetooth |
Fluval Reef 4.0 32 W for marine aquariums with a 59 to 89 cm fitting span. Programmable spectrum and daily light cycle through FluvalConnect.
£173.39 (inc VAT)
Fluval Reef 4.0 32 W is a programmable LED strip for a marine aquarium. The Reef 4.0 range uses full spectrum lighting with actinic channels and can be controlled through the FluvalConnect mobile app. This model fits a span of 59 to 89 cm and the manufacturer lists 1,550 lumens. The 32 W model fits a mid-sized tank where the lighting should extend across the rockwork between the aquarium ends. Check whether the support arms sit clear of an external filter outlet, return nozzle or mesh cover. A slightly different position can help keep the feeding and maintenance area accessible.
Check the fit across your aquarium
Measure the actual support span across the top of your aquarium. The light body is approximately 59 cm long and the published fitting range reaches 89 cm. Check the left and right arms together so the unit sits flat. A tank close to 88 or 89 cm can overlap with the next strip size, so compare the body length and space around its mounting points too.
Compare light at coral depth
The maker quotes a PAR reading of 100 at 30 cm and 55 at 46 cm. These give you two reference points when deciding where to keep each coral. Check the depth, mounting height and rockwork shadows in your setup. Adjust the lamp and the coral positions with the aquarium already assembled.
Set up a daily light cycle
Use FluvalConnect over Bluetooth to set your schedule and adjust the colour channels. Establish a consistent daily cycle before you fine-tune the individual channels or add transitions. Where you already have a reef light, introduce changes steadily and check how the aquarium responds. Choose settings that suit the lighting needs and position of the corals you keep.
Installing and caring for the fixture
Follow the model manual for support, electrical connection and clearance above the aquarium. The fixture has an IP67 rating. Mount it above the water as shown in the instructions and route the cable safely, keeping the driver and its plug in an appropriate dry location. Wipe away salt deposits as directed by Fluval once the equipment is isolated.
Technical overview
| Specification | Details |
|---|---|
| Brand | Fluval |
| Manufacturer reference | 16906 |
| Aquarium type | Marine |
| Rated power | 32 W |
| Fitting span | 59 to 89 cm |
| Body size | 59 Ă— 6.4 Ă— 2.5 cm, approximately |
| Published output | 1,550 lm |
| Control | FluvalConnect over Bluetooth |
| Fixture rating | IP67 |
Common questions
Which Reef 4.0 model is this?
The 32 W unit suits 59 to 89 cm spans and its body is about 59 cm long. Choose it on the actual rim fit and the depth of the layout, which vary even between similarly sized tanks.
What does the stated fitting span measure?
It refers to the published support span across the aquarium. The lamp body is about 59 cm long. Measure where the supports will actually sit and check nearby covers, braces and pipework.
How do I adjust the colour and schedule?
The FluvalConnect app controls the light's colour channels and timed cycle over Bluetooth. Check the app requirements for your device before fitting.
Can I compare output using wattage alone?
Use the fixture's published spread, PAR readings and fitting range alongside its 32 W rating. The output reaching a coral also depends on the depth, placement and shadows in the aquarium.




Reviews
There are no reviews yet.