Fluval Reef 4.0 22 W LED Aquarium Light, 38 to 63 cm
| Brand | |
|---|---|
| Tank fit | 38 to 63 cm |
| Rated power | 22 W |
| Control | FluvalConnect Bluetooth |
Fluval Reef 4.0 22 W for marine aquariums with a 38 to 63 cm fitting span. Programmable spectrum and daily light cycle through FluvalConnect.
£152.89 (inc VAT)
Fluval Reef 4.0 22 W is a programmable LED strip for a marine aquarium. The Reef 4.0 range uses full spectrum lighting with actinic channels and can be controlled through the FluvalConnect mobile app. This model fits a span of 38 to 63 cm and the manufacturer lists 1,000 lumens. This shorter strip is useful over a compact reef where you want the light to span the aquarium with room left for the filtration chamber or lid. Try the arms on the side edges before placing the light over the water. If rockwork sits high, leave a clear open area between the top ledge and the light.
Check the fit across your aquarium
Read the aquarium width at the points where the support arms will rest. Allow for rims, corners that curve inwards and anything that projects into the mounting area. The body itself is about 38 cm long and the published span extends to 63 cm. The 32 W model starts at 59 cm, so the two ranges overlap at some widths.
Compare light at coral depth
A small tank can still have a deep rockscape. The manufacturer lists a PAR reading of 75 at 30 cm for this model. Compare that figure with the placement and requirements of your own corals. A lower ledge, a high perch and an area shaded by rock can each receive different light in the same aquarium.
Set up a daily light cycle
Use FluvalConnect over Bluetooth to set your schedule and adjust the colour channels. Establish a consistent daily cycle before you fine-tune the individual channels or add transitions. Where you already have a reef light, introduce changes steadily and check how the aquarium responds. Choose settings that suit the lighting needs and position of the corals you keep.
Installing and caring for the fixture
Follow the model manual for support, electrical connection and clearance above the aquarium. The fixture has an IP67 rating. Mount it above the water as shown in the instructions and route the cable safely, keeping the driver and its plug in an appropriate dry location. Wipe away salt deposits as directed by Fluval once the equipment is isolated.
Technical overview
| Specification | Details |
|---|---|
| Brand | Fluval |
| Manufacturer reference | 16905 |
| Aquarium type | Marine |
| Rated power | 22 W |
| Fitting span | 38 to 63 cm |
| Body size | 38 Ă— 6.4 Ă— 2.5 cm, approximately |
| Published output | 1,000 lm |
| Control | FluvalConnect over Bluetooth |
| Fixture rating | IP67 |
Common questions
Which Reef 4.0 model is this?
A compact 38 to 63 cm reach and a 22 W rated light make this the shortest of the four standard Reef 4.0 strip sizes. The range also has a separate Nano light with a different form factor.
What does the stated fitting span measure?
It refers to the published support span across the aquarium. The lamp body is about 38 cm long. Measure where the supports will actually sit and check nearby covers, braces and pipework.
How do I adjust the colour and schedule?
The FluvalConnect app controls the light's colour channels and timed cycle over Bluetooth. Check the app requirements for your device before fitting.
Can I compare output using wattage alone?
Use the fixture's published spread, PAR readings and fitting range alongside its 22 W rating. The output reaching a coral also depends on the depth, placement and shadows in the aquarium.




Reviews
There are no reviews yet.