Burtons Dechlorinator GAC Replacement Cartridges

Burtons GAC Dechlorinator Replacement Cartridges

Genuine 10-inch and 20-inch replacement media for compatible Burtons water purifiers

These Burtons GAC replacement cartridges are available in 10-inch and 20-inch sizes. Select the exact length used by your purifier housing; the two sizes are not interchangeable.

Role in the purifier: The GAC stage contains granular activated carbon, providing a large surface area that adsorbs chlorine, chloramine and organic impurities.

GAC normally follows the sediment stage. Correct flow and timely replacement are essential because exhausted carbon can look unchanged.

Our practical advice: write the installation date on the housing and test the treated water. Flow from the outlet does not prove that a cartridge still has useful treatment capacity.

Choosing the correct cartridge

• Select 10-inch or 20-inch to match the existing housing.
• Check the stage label before removing the old cartridge.
• Replace damaged seals and clean the housing before reassembly.
• Prime and flush the new cartridge for several minutes before pond use.
• Keep the purifier and spare cartridges protected from frost and contamination.

Replacement and maintenance

Isolate the mains supply, release pressure and open the correct housing with the proper spanner. Remove the old cartridge, clean the housing without household detergent, inspect the O-ring and fit the replacement in the same orientation. Reassemble carefully, restore the water slowly and check for leaks.

Burtons gives an approximate six-month interval for a complete cartridge set, but actual life varies with source-water quality, flow and total volume. A suitable chlorine test at the outlet is the most useful way to identify breakthrough.

Frequently asked questions

Will this cartridge fit both purifier sizes?

No. Choose the 10-inch or 20-inch variation that matches your housing.

Can I replace only one stage?

You can replace an individual cartridge, but the other stages may be approaching exhaustion at the same time. For predictable performance, many owners replace the full set together.

Why must a new cartridge be flushed?

Flushing primes the media and removes loose manufacturing dust before the outlet is directed to the pond.

Can I judge condition from the colour?

No. Carbon media can be exhausted without a visible change. Use the service interval and test the treated water.

Where can I find the other stages?

Browse the complete Burtons replacement-cartridge range or return to pond water purifiers.

---

Build the correct replacement set

This granular activated-carbon cartridge works as part of a staged purifier. Check the PRE sediment stage, CTO carbon-block stage and KDF stage at the same service. Complete 10-inch and 20-inch Burtons dechlorinators are also available.