Aqua One Maxi 104F Internal Aquarium Filter

SKU: A11334
Brand

Aquarium size guide

Up to 180 litres

Maximum flow

1,480 L/h

Power

30 W

Height

33.5 cm

Flow adjustment

Front flow adjuster

Aqua One Maxi 104F powered internal filter for aquariums up to 180 litres, with 1,480 L/h maximum flow, black sponge media and spray bar, duckbill and venturi outlet options.

£50.00 (inc VAT)

The Aqua One Maxi 104F is a powered internal aquarium filter with black sponge media for mechanical and biological filtration. Aqua One gives it an aquarium size guide of up to 180 litres and a maximum flow of 1,480 litres per hour. It sits inside the aquarium, so the filter and its media remain easy to reach without an external canister or pipework.

Choosing the Maxi 104F

The 104F is the largest model in this Maxi range, with a 180-litre aquarium guide and a 33.5 cm body height. Its front flow adjuster and outlet choices help you direct the return, but the high maximum output still needs to suit the livestock. Allow room around the intake and enough access to remove the sponge housings for maintenance. Aqua One describes the larger Maxi models mainly as support for an existing filtration system or for extra water movement.

An aquarium-volume guide is a starting point. Fish size, stocking, feeding, plants and the way the aquarium is arranged all influence the filtration and circulation needed. A maximum flow rating does not mean that every litre of water will pass through at that rate once media, dirt and outlet fittings add resistance.

What is included

The filter is supplied with black sponge media, a spray bar, duckbill outlet, airline, venturi aeration nozzle and four suction cups. These fittings give you a choice of how the filtered water returns to the aquarium. The unit is supplied assembled; check that its parts are correctly seated before first use.

The spray bar distributes the return across a wider area, while the duckbill provides a more directed outlet. The venturi fitting draws air into the return when its airline is positioned as instructed. This is an electric filter: a separate air pump is not needed to drive it.

Installing and directing the return

Mount the filter vertically inside the aquarium using its suction cups, with the whole unit submerged. Keep the intake clear of gravel, sand, ornaments and plants, and do not rest it on the substrate. Leave enough clearance to lift out and open the filter when it needs cleaning.

Choose the outlet before positioning the filter. Aim for useful circulation and surface movement without forcing small or weak-swimming fish to struggle against a concentrated jet. If using venturi aeration, keep the airline air intake above the aquarium water level.

The front flow adjuster lets you increase or reduce the return. Adjust it to the aquarium and watch the fish, rather than treating the highest setting as the best setting for every situation.

How the sponge filtration works

The sponge catches suspended waste and also provides a surface for beneficial bacteria. A new filter needs time to develop this biological activity, so it does not make a newly filled aquarium immediately ready for full stocking. Continue regular water testing, water changes and sensible feeding.

As the sponge collects debris, flow can fall. Check the intake and media before assuming that the motor is faulty. Avoid packing extra material tightly into the housing, as restricting the water path can reduce circulation.

Cleaning and ongoing care

Unplug aquarium electrical equipment before putting your hands in the water or removing the filter. Gently rinse dirty sponge in water taken from the aquarium, rather than under a hot or chlorinated tap. The aim is to remove accumulated waste without unnecessarily stripping away the established bacterial population.

Clean only one sponge section at a time and alternate sections between services. This preserves some established media while the other section is cleaned.

Inspect the impeller and its chamber as part of routine maintenance, using a suitable soft brush where needed. Refit the parts correctly, fully submerge the unit again and dry your hands before reconnecting the power. Make a drip loop in the power cable and follow the supplied electrical safety instructions.

Technical overview

Detail Specification
Brand Aqua One
Model Maxi 104F
Manufacturer article 11334
Filter type Powered submersible internal filter
Aquarium size guide Up to 180 litres
Maximum flow 1,480 L/h
Power 30 W
Cable length 1.8 m
Height 33.5 cm
Filter medium Black sponge
Filtration Mechanical and biological
Mounting Internal suction-cup mounting; four cups supplied
Outlet options Spray bar, duckbill and venturi
Flow adjustment Front flow adjuster

Frequently asked questions

What size aquarium is the Maxi 104F for?

Aqua One gives the 104F a guide of up to 180 litres. Use that alongside the fish, stocking level, feeding and required current; it is not a guarantee for every aquarium of that size.

Is 1,480 L/h the flow at every outlet setting?

It is the published maximum flow. Media condition, outlet fittings and resistance in use affect the actual return to the aquarium.

Does it need a separate air pump?

No. The filter has its own electric motor. Its venturi fitting can introduce air into the water return when installed as instructed.

Which outlet fittings are supplied?

Aqua One lists a spray bar, duckbill outlet, airline and venturi aeration nozzle, together with four suction cups. Black sponge is supplied as the filter medium.

Can the filter run outside the water?

No. Install it vertically and fully submerged inside the aquarium, with the intake clear of the substrate and decorations. Do not run it dry.

Can I adjust the Maxi 104F flow?

Yes. The 104F has a front flow adjuster. Use it with the outlet choice and direction to find a current that suits the aquarium.

How should I clean the sponge?

Rinse it gently in water removed from the aquarium after unplugging the equipment. Clean one section at a time and alternate the sections, rather than washing all established media together.

Compare more options in our aquarium internal filters range.

Representative manufacturer packaging photograph. One Aqua One Maxi 104F filter is supplied. Any printed extended guarantee is subject to Aqua One’s applicable terms and registration requirements.

Aqua One Maxi 104F Internal Aquarium Filter Reviews

Reviews

There are no reviews yet.

Be the first to review “Aqua One Maxi 104F Internal Aquarium Filter”