Aqua One 28S Replacement Sponge for Maxi 104F – 2 Pack

SKU: A25028S
GTIN: 9325136001891
Brand

Compatible filter

Maxi 104F

Media type

Sponge

Pack size

2 sponges

The Aqua One 28S is the matching replacement sponge for the Maxi 104F internal aquarium filter. Choose it by the filter model and spare-part code rather than by aquarium size or the appearance of another foam pad. The foam catches debris and provides a surface for the filter bacteria that develop during use. This pack contains two replacement sponges. The powered filter, motor and housings are not included.

£7.95 (inc VAT)

The Aqua One 28S pack contains two replacement sponges matched to the Maxi 104F internal aquarium filter. Manufacturer code 25028S identifies this spare-media pack. It is intended as an additional maintenance purchase for the existing filter, rather than as a complete filter.

Choose 28S for the Maxi 104F

Match the filter model and its sponge part number before ordering. The 104F uses the 28S sponge code; the fact that another pad belongs to the Maxi range does not establish that it will fit. Check your filter’s label and spare-parts instructions if the model marking is unclear.

This listing supplies two sponges only. Retain the filter’s existing motor assembly, impeller, holders and casings unless a separate component also needs attention. Those powered and plastic parts are not included in the replacement media pack.

What the sponge does

The sponge catches particles carried through the filter and provides a surface for biological activity to develop. Both roles matter: trapped debris needs removing during maintenance, while established filter bacteria should be disturbed as little as practical.

New foam is replacement media, not an already mature biological filter. Keep established media where practical while a replacement becomes established, and continue normal aquarium water testing. A larger filter model does not remove the need to match the specific replacement part.

Cleaning and checking for wear

Unplug the filter before accessing its sponge sections. Use water taken from the aquarium to gently rinse or squeeze a dirty sponge, following Aqua One’s manual. Avoid tap water and excessive cleaning. The manual recommends washing one sponge at a time and alternating the sections, rather than disturbing all the media in one service.

Consider replacement if the foam has split, deteriorated or no longer sits correctly in its casing. Base replacement on the condition of the foam, rather than discarding sound media simply because it has collected debris. Check the rest of the water path if output remains poor after cleaning, including the intake and impeller, because a circulation issue is not always caused by worn sponge. Reassemble the filter correctly before restarting it.

Technical overview

Detail Specification
Brand Aqua One
Compatible filter Maxi 104F
Media type Sponge
Pack size 2 sponges
Manufacturer part 25028S
Short spare code 28S
Filtration role Mechanical capture and a surface for biological filtration
Supplied item Two additional replacement sponges; powered filter and casings excluded

Frequently asked questions

How many pads are in the pack?

Two 28S replacement sponges are supplied for the Maxi 104F.

Can I use a 27S sponge instead?

Choose the spare listed for your actual filter. Aqua One maps 27S to the 103F and 28S to the 104F.

Does replacing the sponge replace the motor?

No. The motor and impeller are separate filter components. This pack supplies additional sponge media only.

Representative Aqua One manufacturer packaging photograph. This listing supplies one two-sponge replacement pack for the stated filter model; the complete filter is sold separately.

Aqua One 28S Replacement Sponge for Maxi 104F – 2 Pack Reviews

Reviews

There are no reviews yet.

Be the first to review “Aqua One 28S Replacement Sponge for Maxi 104F – 2 Pack”