Aqua One 200 Micron Round Aquarium Filter Sock and Bracket 50104

SKU: A50104
GTIN: 9325136173314
Mesh

200 microns

Dimensions

12 Ă— 11.5 Ă— 26.5 cm

Sump glass

Up to 6 mm

Aquarium type

Marine

A round 200 micron mesh sock and mounting bracket for a marine aquarium sump. Fits glass up to 6 mm and feed pipe up to 50 mm.

£10.99 (inc VAT)

The Aqua One 50104 Round Filter Sock catches solid debris at the point where water enters a marine sump. Water passes through the 200 micron mesh, leaving particles such as uneaten food and larger suspended material in the sock. The included acrylic holder supports the rim and lets the sock lift out by its handle for washing.

Choosing the round 50104

This is the round 12 Ă— 11.5 Ă— 26.5 cm assembly. Measure available space in the sump, including the depth below the bracket and enough room above to lift out the sock. Aqua One specifies a feed pipe up to 50 mm and mounting on suitable glass up to 6 mm thick.

Putting the sock ahead of other media

Position the bracket where water from the drain can enter the sock before it circulates through the rest of the sump. Align the opening as you secure the holder. Check water movement and clearance with the pump operating and keep the sump accessible for routine maintenance.

Maintaining the mesh

Remove the sock by its handle when trapped debris builds up or the flow through the mesh reduces. Rinse it under clean running water without soap or detergent. Inspect the stitching and the rigid rim as you put it back. The mesh carries out mechanical filtration as part of the sump setup.

Finding the right spare

Aqua One lists article 50105 as the matching round replacement. Retain the supplied bracket if it is in good condition. Older rectangular Aqua One socks have a different rim and bracket, so compare the article number and shape when choosing a replacement.

Technical overview

Specification Details
Brand Aqua One
Manufacturer article 50104
Aquarium type Marine sump
Mesh 200 microns
Dimensions 12 Ă— 11.5 Ă— 26.5 cm
Glass thickness Up to 6 mm
Feed pipe diameter Up to 50 mm
In the box One round filter sock and acrylic mounting bracket
Replacement sock code 50105

Common questions

Is the holder included?

Yes, the 50104 assembly includes the acrylic mounting bracket and one round sock.

Can I use the bracket on thick sump glass?

Aqua One specifies glass up to 6 mm. Measure the edge and allow room for the bracket.

What is the replacement part number?

Aqua One 50105 is the round replacement sock for this holder.

Can the sock be reused?

Yes, rinse the mesh as part of routine maintenance and replace it if damaged.

Browse aquarium filter media.

Aqua One 200 Micron Round Aquarium Filter Sock and Bracket 50104 Reviews

Reviews

There are no reviews yet.

Be the first to review “Aqua One 200 Micron Round Aquarium Filter Sock and Bracket 50104”