Aqua One 10992 Replacement Powerhead for AquaStart 320, AquaMode 300 and UFO350

SKU: A0992
GTIN: 9325136022988
Brand

Fits

Original AquaStart 320, AquaMode 300, UFO350

Rated flow

400 L/h

Aqua One 10992 replacement powerhead for the original AquaStart 320, AquaMode 300 and UFO350, rated at 400 L/h. Supplied as one replacement pump unit. Check your existing part number and filter layout, especially on AquaStart 320 models.

£26.12 (inc VAT)

The Aqua One 10992 replacement powerhead provides water movement for the original AquaStart 320, AquaMode 300 and UFO350 aquarium filter systems. Its rated flow is 400 litres per hour. Replacing the matching pump unit lets you keep the aquarium’s existing filter layout and fittings.

This is a useful replacement when the original powerhead needs renewing. Start by checking the number and shape of the unit already fitted: Aqua One has used different filter arrangements across its aquarium ranges, including more than one AquaStart 320 design.

Choose the right AquaStart 320 version

The original AquaStart 320 uses an undergravel filter. The 10992 belongs to this older filter arrangement. The newer AquaStart 320 LED with a rear filter uses the different 10990 powerhead, so an aquarium name or nominal tank size on its own is not enough to choose the replacement.

For an AquaMode 300 or UFO350, compare your existing powerhead and its connections with part 10992. Keeping the correct replacement matched to the original assembly helps avoid buying a pump that has a similar name but different fittings.

Water flow and filter condition

The 400 L/h rating describes water flow through the powerhead. Actual flow in the aquarium also depends on the connected filter system, pipework and maintenance. A dirty intake or restricted pipe can reduce circulation, so a drop in flow does not automatically mean the whole powerhead has failed.

Before choosing a replacement, inspect the intake and pipework for obstructions, check the aquarium water level and examine the impeller for dirt or damage in accordance with the aquarium instructions. The original AquaStart 320 parts list identifies the 1i impeller set, part 25001I, for servicing the matching original pump.

Fitting and everyday care

Disconnect the electrical supply before handling the powerhead or carrying out maintenance. Follow the instructions for your exact aquarium and use its matching fittings when installing the replacement. Keep the water path clear and inspect the impeller during routine servicing. Electrical cables, plugs and sealed motor parts should remain unmodified.

Technical information

Feature Details
Part Aqua One 10992
Fits Original AquaStart 320, AquaMode 300 and UFO350
Rated flow 400 litres per hour
Unit One replacement powerhead

What is included?

One Aqua One 10992 replacement powerhead unit. It is intended to work within the matching aquarium filter assembly. Keep your aquarium model and existing part number to hand when choosing any additional filter fittings or service parts.

Explore our aquarium equipment and accessories for other filtration and maintenance products.

Questions about the Aqua One 10992

Which aquariums use the 10992 powerhead?

Aqua One lists it for the original AquaStart 320, AquaMode 300 and UFO350. Match the part number and filter layout on your existing aquarium before ordering.

Does it fit an AquaStart 320 LED?

The newer AquaStart 320 LED rear filter uses a different powerhead, 10990. Check which filter system your aquarium has; the 320 name alone does not identify the correct replacement.

What does the 400 L/h figure mean?

It is the powerhead’s rated water flow. It is not an aquarium capacity or an air delivery figure, and the installed flow depends on the filter layout and its condition.

What is supplied?

One Aqua One 10992 replacement powerhead unit for use with the matching aquarium filter assembly.

Should I replace the powerhead if the flow has dropped?

Check the intake, pipework, water level and impeller first, following your aquarium instructions. A blockage or a worn impeller can reduce flow even when the motor unit still works.

Which impeller is associated with the original AquaStart 320?

Aqua One’s original AquaStart 320 parts list identifies the 1i impeller set, part 25001I. Match it to your existing powerhead before choosing a service part.

Representative photograph of the Aqua One Powerhead 320. One replacement powerhead (10992) is supplied. It does not fit the newer AquaStart 320 LED.

Aqua One 10992 Replacement Powerhead for AquaStart 320, AquaMode 300 and UFO350 Reviews

Reviews

There are no reviews yet.

Be the first to review “Aqua One 10992 Replacement Powerhead for AquaStart 320, AquaMode 300 and UFO350”