The TMC REEF-Pump 2000 is a DC return pump for sumped marine or freshwater aquariums. It is designed for fully submerged installation and is rated up to 2,000 L/h. The controller lets you set the flow for your aquarium and gives you a timed pause while feeding.
Choosing the right flow and space
This is a lower flow option in the REEF-Pump range for a smaller return section. Measure the working space in the sump and the lift up to the outlet. Leave room to remove the intake strainer for cleaning. Flow will be lower when the pipework adds lift or resistance. The maximum flow and maximum head are separate limits.
Adjusting the return
The current model page specifies ten variable speed settings. Start with a setting that suits your overflow and adjust it after checking the water level and circulation. The REEF-Pump feed mode pauses the pump for ten minutes before normal running resumes.
Installing in an aquarium sump
Fit the feet and the appropriate manufacturer-supplied hosetail as directed. Keep the pump fully submerged and secure it in the sump. Place the controller and power supply somewhere dry and away from splashing. Check the hose connection and the path of the return line before fitting it.
What comes with the pump
The REEF-Pump parts diagram shows the pump with its strainer, support feet, controller and UK power supply, plus the supplied hosetails with a collar and seal. Select any separate return pipework for the actual hose fittings and your aquarium.
Access for regular cleaning
The intake and impeller need access for cleaning. Isolate the power before servicing the pump and follow the instructions for the exact model. Keep the inlet clear to maintain a steady return flow.
Technical overview
| Specification | Details |
|---|---|
| Brand | TMC Reef |
| UK model | 9911 |
| Advertised maximum flow | 2,000 L/h |
| Maximum head | 3.5 m |
| Current TMC UK power | 33 W |
| Pump voltage | 24 V DC |
| Listed dimensions (L Ă— W Ă— H) | 128 Ă— 67 Ă— 123 mm |
| TMC system volume guide | 500 litres |
| Water type | Marine and freshwater aquariums |
| Mounting | Fully submerged in water |
| In the box | One pump with strainer, feet, controller, UK power supply and the supplied hose fittings |
Common questions
Where does the pump go?
Install the pump fully submerged in a suitable aquarium sump. Keep its controller and power supply dry.
Is the flow adjustable?
Yes. Use the controller to choose the flow for your setup. Actual flow depends on pipework and lift.
What does the feed mode do?
It pauses the return for ten minutes and then resumes operation.
Are a controller and fittings included?
Yes. The parts list includes the controller, power supply, and the pump's supplied hose fittings, strainer and feet.




Reviews
There are no reviews yet.