Interpet Aqua Air AP3 Aquarium Air Pump
| Brand | |
|---|---|
| Aquarium guide | 101–150 litres; manufacturer selection guide |
| Rated airflow | 2 x 180 L/h |
| Power | 5W |
| Air outlets | 2 |
| Size H x W x D | 9.6 x 13.3 x 7.1cm |
Interpet Aqua Air AP3 is the twin-outlet option in this group of Aqua Air diaphragm pumps. The manufacturer’s aquarium selection guide is 101–150 litres, and the pump is supplied without airline or airstones so the two air lines can be arranged for your chosen features.
One AP3 air pump and an instruction leaflet are supplied. Airline, airstones, check valves and connecting pieces are separate. Plan both outlet paths and follow the manual’s layout guidance rather than assuming the photographs of a complete aquarium show equipment supplied with the pump.
£29.88 (inc VAT)
Interpet Aqua Air AP3 is the twin-outlet option in this group of Aqua Air diaphragm pumps. The manufacturer’s aquarium selection guide is 101–150 litres, and the pump is supplied without airline or airstones so the two air lines can be arranged for your chosen features.
Choosing and comparing
The manual states a rated airflow of 2 x 180 litres per hour. This is a twin-output rating, not a claim that each line delivers 360 litres per hour. The product page lists 5 W electrical input. Actual output at the diffuser depends on the complete air-line system and operating depth.
AP2 is a single-outlet pump rated 210 L/h, while AP3 gives you two physical outlets. This can be useful for two suitably matched features or a planned distribution system. It does not mean that every ornament, filter or long airwall will run satisfactorily regardless of its air requirement.
Technical overview
| Detail | Specification |
|---|---|
| Model | AP3 |
| Maker code | 2503 |
| Aquarium guide | 101–150 litres; manufacturer selection guide |
| Rated airflow | 2 x 180 L/h |
| Power | 5 W |
| Air outlets | 2 |
| Size H x W x D | 9.6 x 13.3 x 7.1 cm |
| Placement | Indoors, dry and outside the aquarium |
| Service kit | 2542; optional |
| Included | Pump and instructions |
What is supplied
One AP3 air pump and an instruction leaflet are supplied. Airline, airstones, check valves and connecting pieces are separate. Plan both outlet paths and follow the manual’s layout guidance rather than assuming the photographs of a complete aquarium show equipment supplied with the pump.
Positioning and installed airflow
Keep the pump dry, indoors and on a stable surface. If positioned above the water level, the manual says it should not sit directly over the aquarium, where it could fall in. If placed below water level, fit a check valve near the pump outlet to prevent back-siphoning. For marine use the maker recommends above-water positioning and a check valve. Follow the supplied electrical safety and installation directions.
Care and checks
Inspect the airline, connections and air features regularly. Reduced bubbles can come from a kink, leak or blocked stone rather than a failed pump. The maker recommends replacing the air filter pad every three to six months, depending on the operating environment. Switch off and disconnect before maintenance and follow the service instructions for this exact model. Check that the pump sits securely on its feet if vibration becomes noticeable.
Questions before choosing
Is the rating 180 or 360 litres per hour?
The maker states 2 x 180 L/h: two outlets, each with the stated nominal rating. Do not describe it as 360 L/h per outlet or as guaranteed installed flow.
Which service kit belongs to AP3?
Interpet identifies maintenance kit 2542 for AP3. Kit 2541 belongs to AP1/AP2. Always match the model rather than choosing parts by the Aqua Air family name alone.




Reviews
There are no reviews yet.