Oase Spiral Aquarium Hose Cleaning Brush 150 cm
| Brand | |
|---|---|
| Length | 150 cm |
| Suitable hose bore | 9–25 mm |
Flexible Oase aquarium hose brush for 9–25 mm internal diameter tubing, with a total length of 150 cm.
£8.29 (inc VAT)
The Oase Spiral Brush 43964 is a flexible cleaner for the inside of aquarium filter hoses. It reaches up to 150 cm in total and suits hose bores from 9 to 25 mm. Use it when debris or build up inside a compatible hose needs a brush instead of a rinse alone.
Choose by the internal diameter of the hose
Read the hose marking or measure the opening. In a 12/16 mm hose the first number is normally the 12 mm internal diameter. That size is within this brush’s range, including the original 12/16 mm hose supplied with the Oase FiltoSmart 100. The original 8/12 mm FiltoSmart 60 hose has an 8 mm bore, so choose a smaller brush for that hose.
Clean the hose off the aquarium
Follow the filter manual for switching off and disconnecting the hose. Lay the hose in a suitable sink or maintenance container and guide the brush gently through the tubing. Move slowly around curves and stop if the brush catches in a connector. The 150 cm total length helps reach inside long hoses, and some lengths are easier to clean from both ends.
Rinse before refitting
Flush loosened material from the hose before reconnecting it. Check the connections and follow the filter’s priming instructions before restarting. Oase recommends a thorough freshwater rinse of the brush after use with saltwater aquarium hoses. Drain and store the brush after maintenance.
What comes in the pack
One Oase flexible spiral brush with a brush head and flexible shaft. The aquarium hose and filter are separate items.
Technical overview
| Specification | Details |
|---|---|
| Brand | Oase |
| Total length | 150 cm |
| Suitable hose bore | 9–25 mm internal diameter |
| Use | Aquarium filter hose cleaning |
| Water type | Freshwater and saltwater aquariums |
| Pack contents | One flexible spiral brush |
Common questions
Which measurement do I use to check fit?
Use the inside diameter. The brush suits a hose bore of 9 to 25 mm.
Will it fit the original FiltoSmart 100 hose?
Yes. The standard FiltoSmart 100 uses a 12/16 mm hose with a 12 mm internal diameter. Check the size if you have fitted a different hose.
Will it fit the original FiltoSmart 60 hose?
The FiltoSmart 60 uses an 8/12 mm original hose. Its 8 mm bore is below the 9 mm minimum.
Can it be used for a marine aquarium hose?
Yes. Rinse the brush thoroughly with fresh water after using it with a saltwater aquarium hose.




Reviews
There are no reviews yet.