Oase CrystalSkim 350 Aquarium Surface Skimmer
| Brand | |
|---|---|
| Article | 86946 |
| Type | Aquarium surface skimmer |
| Aquarium guide | Up to 350 litres |
| Flow range | 200–300 litres/hour |
| Power | 4.5 W |
| Supply | 230 V / 50 Hz |
| Dimensions | 36 Ă— 116 mm (diameter Ă— height; holder excluded) |
| Cable | 2 m |
| Level travel | 2.5 cm |
| Net weight | 0.4 kg |
| Water type | Freshwater and saltwater |
| Guarantee | 3 years; manufacturer conditions apply |
Compact aquarium surface skimmer for floating debris, biofilm and plant trimmings. GB article 86946: adjustable 200–300 litres/hour, 4.5 W, freshwater and saltwater use. Oase size guide: up to 350 litres.
£50.00 (inc VAT)
The Oase CrystalSkim 350 removes floating debris and surface film from a freshwater or marine aquarium. Its own 200–300 litre-per-hour pump draws surface water through a sponge, collecting fine plant fragments that a net can miss after trimming. The floating intake follows small changes in water level, while the compact body mounts to the aquarium glass. This is the GB article 86946, with a 230 V / 50 Hz, 4.5 W motor.
Choosing the right CrystalSkim
Oase gives the 350 an aquarium size guide of up to 350 litres. Use that figure alongside the shape of your tank, the amount of floating debris and the circulation already present. It describes a surface-cleaning application rather than the biological filtration capacity of the aquarium. Positioning matters: floating material must be able to reach the intake rather than collect behind hardscape or dense plants.
The CrystalSkim 600 is the other size in the range. The 350 provides 200–300 litres/hour in a 36 mm diameter body; the 600 provides 400–600 litres/hour in a 49 mm diameter body. Both current GB models are rated at 4.5 W. A larger skimmer is therefore a choice about intake capacity and physical size, rather than a substitute for checking that the flow suits your aquarium inhabitants.
What it removes
A persistent surface film can obstruct gas exchange. Removing it helps keep the water surface clear, and the adjustable intake lets you set the collection rate to suit the task. The skimmer can also collect duckweed and loose trimmings; check the collection area more often after cutting plants, because a sudden load of debris can fill the sponge quickly.
CrystalSkim is a surface skimmer, rather than a foam-fractionating protein skimmer. It works alongside the aquarium’s normal filtration and maintenance. Keep the intake protection fitted when small inhabitants are present and inspect it regularly. The guard is an additional safeguard, not a reason to leave fry or delicate livestock unobserved near an intake.
What is included
- CrystalSkim 350 surface-skimmer assembly with its integrated pump and sponge filter.
- Floating intake, crown and intake-protection components.
- Holder, suction mounting and cable-guide components.
A spare sponge is a separate replacement item. The product photograph shows the skimmer assembly; aquarium, plants and livestock are not supplied.
| Article | 86946 |
|---|---|
| Type | Aquarium surface skimmer |
| Aquarium guide | Up to 350 litres |
| Flow range | 200–300 litres/hour |
| Power | 4.5 W |
| Supply | 230 V / 50 Hz |
| Dimensions | 36 Ă— 116 mm (diameter Ă— height; holder excluded) |
| Cable | 2 m |
| Level travel | 2.5 cm |
| Net weight | 0.4 kg |
| Water type | Freshwater and saltwater |
| Guarantee | 3 years; manufacturer conditions apply |
Installation and everyday use
Before first use, rinse the sponge thoroughly in cold tap water as directed in the instructions. Mount the holder securely to a clean aquarium pane, with the float initially high on the water surface. The stated 2.5 cm travel helps it accommodate a limited fall in level; it does not remove the need to top up evaporated water or check that the intake is floating correctly.
Use indoors, keep the pump supplied with water and form a drip loop below the socket. Disconnect all electrical equipment in the water before reaching into the aquarium or removing parts. Never operate the unit with a damaged housing or cable, and follow the supplied instructions for electrical safety and dismantling.
Cleaning and replacement parts
Inspect the sponge, intake and rotor if collection slows. Oase recommends cleaning when performance noticeably drops, using clean water and a soft brush or sponge rather than aggressive cleaning chemicals. The casing separates for maintenance without tools. Clear plant fragments from the intake and check that the float moves freely before restarting.
For this exact model, the manufacturer identifies sponge 91210, floater/strainer 76294 and 50 Hz rotor 90832. Holder 76550 appears in the parts list for both sizes. Match the model and frequency when choosing a replacement; the US 60 Hz rotor is a different part.
Common questions
Does it replace the aquarium filter?
No. It concentrates on the water surface and floating material. Continue to provide filtration and water care appropriate to your fish, plants and aquarium.
Can it run in saltwater?
Yes. Oase lists both freshwater and saltwater suitability for this GB model. Keep the same checks on the intake, sponge and safe electrical installation.




Reviews
There are no reviews yet.