Interpet 34 cm Colour Change LED Bubble Wand
| Brand | |
|---|---|
| Wand length | 34 cm |
| Lighting | Colour-changing LEDs |
| Airflow guide | 170 L/h recommended |
| Dimensions | 35.5 Ă— 2.7 Ă— 1.7 cm |
| Aquarium use | Indoor coldwater and tropical |
Flexible 34 cm LED air diffuser with colour-changing lights. Includes transformer and suction attachments; a suitable aquarium air pump and connecting airline are sold separately.
£21.88 (inc VAT)
The Interpet 34 cm Colour Change LED Bubble Wand combines a flexible aquarium air diffuser with changing LED colours. It can sit along the base or curve around aquarium features, giving a different effect from a single air stone. This is Interpet product 3508, with a nominal wand length of 340 mm, for indoor coldwater and tropical aquariums.
The submerged wand needs two separate supplies: its included transformer powers the lights, while a suitable aquarium air pump produces the bubbles. The air pump and the connecting aquarium airline are sold separately.
Choosing the air pump
Interpet’s photographed packaging gives a recommended airflow of 170 litres per hour for the 34 cm 3508 model. Use that recommendation when selecting a pump, and allow for the actual installation, including the water depth and airline route. The figure is a pump-selection guide for this wand, rather than the aquarium’s water turnover.
An existing pump may be suitable if it can supply the required air under the conditions of use. Check its available output before sharing it between several air stones or accessories. Match the connecting aquarium airline to the pump and the wand’s inlet, following both sets of instructions.
What is included
- 340 mm flexible diffuser airline section.
- 340 mm flexible colour-changing LED wand.
- Low-profile transformer and plug.
- Suction attachments.
- Instructions.
The flexible airline listed in the box is the short diffuser section of the assembly. You still need the separate connecting airline between the aquarium air pump and the bubble wand. The air pump is also a separate purchase.
Positioning the wand
The flexible assembly allows a gentle curve around suitable aquarium features. The manufacturer’s instructions describe placing the weighted wand on the bottom or attaching it to the glass with the supplied suction fittings. Clean the glass first so that the suckers can hold properly, and choose a position that leaves the assembly accessible for cleaning.
Follow the manual when connecting the air supply and positioning the electrical cable. The wand itself is submersible; the plug-in transformer is not waterproof. Keep the transformer clear of splashes and where it cannot fall into the water, and arrange the required drip loops before switching on. Use this equipment indoors.
Keeping the bubbles flowing
When the bubble output falls, switch off the air pump before removing the wand. The manual recommends wiping away deposits with a damp cloth and avoiding cleaning chemicals that could reach the aquarium. Follow its cleaning and drying sequence for the flexible diffuser section before reinstalling it.
A blocked diffuser creates additional resistance for the pump. Interpet identifies the flexible diffuser airline and the suction fittings as replaceable parts; inspect their condition during maintenance. Keep the air pump itself maintained according to its own manufacturer’s directions.
Technical overview
| Detail | Specification |
|---|---|
| Brand | Interpet |
| Product code | 3508 |
| Nominal length | 34 cm / 340 mm |
| Lighting | Colour-changing LEDs |
| Recommended airflow | 170 L/h, as printed on the manufacturer packaging for model 3508 |
| Assembled dimensions | 35.5 Ă— 2.7 Ă— 1.7 cm (H Ă— W Ă— D) |
| Aquarium use | Indoor coldwater and tropical aquariums |
| Electrical supply | Low-voltage LED assembly with supplied transformer; transformer must remain dry |
Frequently asked questions
Does it include an air pump?
No. The air pump and the connecting aquarium airline are sold separately. The supplied transformer powers the LEDs.
Is the transformer waterproof?
No. The wand is submersible, but the plug-in transformer must stay dry and outside the aquarium as described in the manual.
What airflow does the 34 cm model need?
The manufacturer packaging recommends 170 L/h for product 3508. Choose the air supply with the installed water depth and other accessories in mind.
Can I curve it around decorations?
The wand is flexible. The manufacturer describes positioning it around aquarium features or using the suction attachments on the glass.
Is the supplied flexible airline the hose from my pump?
No. It is the 340 mm diffuser section. A separate length of connecting aquarium airline is needed from the pump to the wand inlet.
Compare suitable air pumps and accessories in our aquarium air pumps and water movement range.





Reviews
There are no reviews yet.