Floating Pond Vacuum Hose – Roll
| Hose size | 1¼ inch, 1½ inch |
|---|
This is floating hose supplied as a roll for a compatible pond vacuum system. It is a separate offer from short pre-assembled vacuum hoses and general pond-pump suction hose.
Floating Pond Vacuum Hose – Roll
This is floating hose supplied as a roll for a compatible pond vacuum system. It is a separate offer from short pre-assembled vacuum hoses and general pond-pump suction hose.
Choose by connection size
The options are listed at 1¼ inch and 1½ inch. Check the diameter at the actual vacuum connection and the cuff or coupling arrangement on your existing equipment. Do not choose from hose colour or assume that all vacuum fittings with the same nominal size are interchangeable.
SKS sources currently give different total lengths for these exact codes. Confirm the supplied roll length and the number of usable sections before ordering or working out how many rolls you need.
Checking the vacuum ends and usable length
Measure the fittings you intend to connect, not the outside of a rib in the hose. A cut section needs the right end arrangement for its job; the hose alone may not take the coupling from another vacuum. Plan the route between the vacuum and cleaning area and avoid sharp turns when working out how much usable hose is needed. In this family, the source conflict on total roll length is material: it would change the number of usable sections, so do not use a historic length to calculate an order.
Product details
| Nominal hose choices | FH776 1¼ inch; FH777 1½ inch |
|---|---|
| Form | Roll of floating pond vacuum hose |
| Roll length and cuff layout | Confirm the selected roll specification before ordering |
Available options
| Hose size | Product code |
|---|---|
| 1¼ inch | FH776 |
| 1½ inch | FH777 |
For help planning the rest of the setup, see our guide to choosing pond vacuum equipment.



Reviews
There are no reviews yet.