Charles Austen PC8000 Pond Vacuum Cleaner

SKU: PC8000
Brand

Flow Rate

8, 000 L/hour

Maximum Head / Pressure

3.8 m

Power

155 W

Charles Austen PC8000 Pond Vacuum Cleaner: submersible pond cleaner and sludge pump for removing settled debris and dirty water during pond maintenance. Maximum output 8,000 L/hour. Maximum head 3.8 m. Rated power 155 W. Supplied by Charles Austen.

£208.00 (inc VAT)

Charles Austen PC8000 Pond Vacuum Cleaner

Charles Austen PC8000 Pond Vacuum Cleaner is a submersible pond cleaner and sludge pump intended for removing settled debris and dirty water during pond maintenance. Its published maximum output is 8,000 L/hour with a maximum head of 3.8 m, using 155 W. This page identifies the exact model, duty figures and selection limits so it can be compared accurately with the other products in the range.

Charles Austen is both the product brand and supplier. The figures below come from the current 2026 supplier catalogue, supported by manufacturer guidance where a current technical page is available. Maximum figures are not the same as guaranteed installed performance: pipework, depth, pressure, media loading and maintenance all affect the result.

Who is the PC8000 best suited to?

This model is best considered for removing settled debris and dirty water during pond maintenance. It sits standalone model in this supplier range. That makes it easier to judge whether it is a compact entry model, a mid-range choice or one of the higher-output options before comparing price alone.

Key product features

  • 8,000 litre-per-hour published maximum flow
  • 3.8 metre maximum pumping height
  • 155 watt motor
  • Purpose-built format for pond-cleaning and sludge-removal work
  • Exact SKU and manufacturer part number: PC8000.
  • Supplied through Charles Austen and linked to compatible models for easier range comparison.

Technical specification

Model / MPN PC8000
Product type submersible pond cleaner and sludge pump
Supplier Charles Austen
Brand Charles Austen
Series Pond Cleaners
Maximum water flow 8,000 L/hour
Maximum head 3.8 m
Power 155 W
Energy at 24-hour operation 3.72 kWh per day (calculated from rated wattage)
Installation format Temporary submerged use during pond-cleaning work
Range position Standalone model in this supplier range
Catalogue specification 8,000 L/hour; 3.8m max head; 155W

Technical figures are nominal supplier ratings. The calculated 24-hour energy figure, where shown, is rated wattage × 24 hours and does not include tariffs or intermittent thermostat operation.

Understanding the published specification

The 8,000 L/hour and 3.8 m are clean-water limits. Sludge, leaves, hose length and vertical lift reduce practical output, so the discharge route should be short, wide and free from unnecessary bends. Maximum head is the shut-off point and should not be treated as a working-height guarantee.

The catalogue specification for this exact model is 8,000 L/hour; 3.8m max head; 155W. Where the page includes a calculated daily-energy figure, it is provided only to make continuous-running products easier to compare; it is not an electricity-cost estimate and does not replace the rated power shown above.

How to size this model correctly

The 3.8 metre maximum height is a shut-off figure; usable flow falls as lift and discharge-hose resistance increase. Keep the discharge route as short and unrestricted as practical.

For critical livestock, treatment or commercial systems, allow spare capacity and consider redundancy. If the required duty is close to the model’s maximum, moving to the next size normally provides a more useful operating margin than running a smaller unit continuously at its limit.

Installation and commissioning

Installation format: Temporary submerged use during pond-cleaning work. Keep access available for cleaning and servicing, use appropriately sized hoses or airline, and avoid unnecessary bends or restrictions. Aquatic electrical equipment should be protected by a suitable RCD and installed in accordance with the supplied instructions.

Inspect the intake and hose, place the discharge safely, submerge the cleaner as instructed and verify steady flow before approaching heavy sludge. Stop immediately if the sound changes sharply or flow collapses, as fibrous debris can obstruct the intake.

Commission the complete system by checking actual flow, pressure, water level or temperature at the point of use rather than assuming the headline maximum will be achieved. Recheck after filters, diffusers or pipework have had time to accumulate normal fouling.

Compatible system components

Plan where dirty water will be discharged before starting. Keep enough clean pond water available for topping up and avoid removing excessive water in one session. Work methodically across settled areas so debris is lifted without unnecessarily disturbing the entire pond.

Compatibility should be confirmed from the complete installation: connection size, hose or airline bore, voltage, control method, permitted flow and future servicing access can all affect whether two individually suitable products work correctly together.

Maintenance and service life

Inspect the intake and hose frequently while cleaning, isolate power before clearing debris and rinse the unit after dirty-water use. Do not lift electrical equipment by its cable.

Record the installation date and normal operating performance. A visible reduction in output, increasing noise, rising temperature or repeated tripping should be investigated rather than compensated for by restricting or altering other parts of the system.

Performance checks and fault finding

Intermittent flow usually indicates an obstruction, excessive lift, air entering the intake or a blocked discharge hose. Isolate power before clearing debris. Rinse the equipment after use and inspect seals, hose and impeller before storage.

Compare any suspected fault with the clean, newly commissioned condition. Changes across every outlet or return normally point to the main unit or a shared restriction; a problem affecting one branch is more likely to be local pipework, airline, a valve, diffuser or connected accessory.

Compare similar pond cleaning equipment

The table below links to five nearby models so the buyer and search crawler can move through the range without returning to a search page.

Model Key published duty Product type
50110 Compact pond vacuum for lighter maintenance Pond Vacuum
37148 Continuous dual-chamber pond vacuum Pond Vacuum
42939 Higher-output continuous pond vacuum Pond Vacuum
41983 Pumped-discharge professional pond vacuum Pond Vacuum
FAN2042 Professional pond and pool vacuum Pond Vacuum

Complete the system and explore the range

The supplier and customer-facing brand for this listing is Charles Austen. The links below connect this model to its dedicated range, relevant system components and the wider Charles Austen catalogue.

Technical information sources

Core model figures were checked against the current 2026 Charles Austen supplier catalogue. Family features, installation points and application guidance were cross-checked against current manufacturer technical material where available.

Charles Austen PC8000 Pond Vacuum Cleaner Reviews

Reviews

There are no reviews yet.

Be the first to review “Charles Austen PC8000 Pond Vacuum Cleaner”