Burtons Ceramic Pond Air Stones
| Style | 300mm Tube, 8 Inch Round Disc |
|---|---|
| Brand |
Fine-bubble Burtons ceramic pond air stones in a 300mm tube or 8-inch round disc. Choose the shape that suits the pond, filter chamber or holding system.
Price range: £23.00 through £30.00 (inc VAT)
Burtons Ceramic Pond Air Stones
Fine-bubble ceramic diffusers in tube and round-disc formats
Burtons ceramic air stones break the air from a pond air pump into a broad curtain of fine bubbles. This improves gas exchange at the surface, adds useful circulation and helps deliver oxygen to koi ponds, filter chambers, quarantine systems and holding vats.
Choose the 300mm tube where a long narrow bubble pattern suits a chamber or pond edge. Choose the 8-inch round disc when a wider circular plume is more useful. Both are made from refined ceramic material and are intended for submerged aeration.
Our practical advice: an air stone is only as good as the pump and airline feeding it. Long narrow airline, deep water and a dirty diffuser all increase back pressure, so check the complete run rather than choosing by stone size alone.
Choosing between the two shapes
- 300mm tube: a linear bubble curtain for filter bays, vats and longer narrow areas.
- 8-inch round disc: a broad circular plume for ponds, tanks and central aeration points.
- Fine bubbles provide a large contact area and create useful upward water movement.
- Ceramic construction is rigid and easy to inspect during maintenance.
Match the air pump to depth and back pressure
The litres-per-minute figure printed on an air pump is normally measured under test conditions. Output falls as water depth and restriction increase. Use the pump performance data, keep airline runs sensible and avoid unnecessary small fittings. A manifold with valves allows several outlets to be balanced, but closing too many valves can create harmful back pressure.
Browse our airpump accessories for airline, manifolds and alternative diffusers, or return to our pond air pumps if the pump also needs to be specified.
Cleaning and replacement
Mineral deposits and biofilm gradually block the ceramic surface. If the bubble pattern becomes uneven, isolate the air pump, remove the stone and clean it using a method suitable for pond equipment. Replace cracked stones or units that remain restricted after cleaning.
Frequently asked questions
Which style makes more oxygen?
Oxygen transfer depends on air volume, bubble size, depth and surface movement. Choose the shape that distributes the available air effectively in your installation.
Can I put the stone on the pond bottom?
Yes, if the pump can overcome the water depth. In deep ponds, placing it slightly higher can reduce back pressure while still creating circulation.
Why are the bubbles uneven?
New ceramic can take time to wet fully. Persistent unevenness may indicate deposits, a kinked airline or insufficient pump pressure.
Can one pump run several stones?
Yes, provided it supplies enough air at the working depth. Use a suitable manifold and balance the outlets.
Should the air pump be above water level?
That is the safest arrangement. If it must sit lower, fit appropriate non-return protection and follow the pump manufacturer instructions.
Can I use ordinary clear tube?
Use airline with the correct internal diameter and pressure rating. Very soft or narrow tube can kink and restrict output.
Complete the aeration circuit
For longer or higher-flow installations, the Burtons 30m black pond airline provides an 8mm internal bore for compatible fittings. Keep reductions to a minimum and use a manifold when balancing several diffusers.
Your pond air pump must provide enough air at the installed depth. Browse airpump accessories for manifolds, non-return protection and alternative diffusers.



Reviews
There are no reviews yet.