Aqua One NanoSkim 40 Marine Protein Skimmer

SKU: A50031
GTIN: 9325136111965
Brand

Aquarium size

Up to 40 litres

Flow rate

240 L/h

Rated power

4.4 W

Dimensions

12 Ă— 11.5 Ă— 20 cm

A compact hang-on protein skimmer for marine aquariums up to 40 litres. NanoSkim 40 combines a water pump and separate air pump with a limewood airstone, carbon cartridge and intake sponge. Rated flow 240 L/h; stated power 4.4 W.

£68.99 (inc VAT)

The Aqua One NanoSkim 40 protein skimmer is a compact, pump driven and air assisted unit for marine aquariums up to 40 litres. It hangs on the side or back of the aquarium, making it a practical choice for a small saltwater setup without a sump. The clear body lets you see the reaction chamber, carbon cartridge and collection cup while you check its operation.

This is the complete NanoSkim 40, manufacturer code 50031. A water pump and a separate air pump are included. It is the 240 litre per hour model with a stated power consumption of 4.4 W, rather than the larger NanoSkim 90.

How the NanoSkim 40 works

The water pump moves aquarium water through the unit while the air pump supplies the limewood airstone. The airstone produces many small bubbles, creating a large contact area between air and water. Organic waste is carried into the collection cup as foam, where it can be removed from the aquarium system. The carbon cartridge and intake sponge are separate serviceable parts of the assembly.

Water flow and air delivery can both be adjusted. This gives you control over the foam level rather than relying on a single fixed setting. The manufacturer describes wetter skimming as producing lighter waste and drier skimming as producing darker, more concentrated waste. Start with the instructions and observe the skimmer closely as it settles in during its first week.

Choosing a marine skimmer for a small aquarium

The hang-on format avoids the need for a separate sump and leaves the main skimmer chamber outside the aquarium. The intake still sits inside the tank, so check the position of the inlet, the tank rim and any lid before installation. Allow access above the unit to remove and clean the collection cup. The published overall dimensions are 12 Ă— 11.5 Ă— 20 cm.

The 40 litre figure is the manufacturer’s maximum aquarium rating. Use that alongside your aquarium layout and normal water quality routine when choosing equipment. This product is intended for marine aquariums; it should not be chosen as a general freshwater internal filter.

Technical overview Details
Model Aqua One NanoSkim 40
Manufacturer code 50031
Aquarium type Marine
Aquarium size Up to 40 litres
Flow rate 240 litres per hour
Stated power consumption 4.4 W
Dimensions 12 Ă— 11.5 Ă— 20 cm
Power supply 220–240 V
Installation Hang on the aquarium side or rear
Skimming system Water pump with air pump and limewood airstone
Replacement carbon 110C / manufacturer code 25110C
Replacement sponge 110S / manufacturer code 25110S
Replacement impeller 110I / manufacturer code 25110I
Replacement airstone Manufacturer code 50031-A

What is included?

The complete assembly includes the skimmer body and collection cup, water pump and intake assembly, intake sponge, carbon cartridge, limewood airstone, separate air pump, airline, air control valve and check valve. These are the operating components shown in the manufacturer’s setup and parts diagram. Replacement consumables purchased later are additional items, sold separately.

Installation and first use

Keep the external air pump dry on a level surface and fit the skimmer level against the aquarium glass using its spacer. Follow the supplied instructions for the operating water level and connect the airline and valves in the correct direction. Rinse the carbon cartridge as directed before first use, without soap or detergent. Arrange a drip loop for each electrical lead and disconnect the equipment before maintenance.

Adjust the air and water flow so that bubbles rise through the neck without immediately flooding the cup. Recheck the setting during the first week because operation changes during the run-in period. The full Aqua One NanoSkim 40/90 instructions cover assembly, adjustment and safety in detail.

Maintenance and replacement parts

Rinse accumulated debris from the intake sponge weekly and inspect and clean the impeller monthly, following the manufacturer’s guide. Inspect the cup and remove collected waste as required. The manual also describes periodic cleaning of the cup and drain airline, and regular checks of both airline valves for blockage.

A blocked carbon cartridge can raise the water level inside the skimmer and contribute to overflowing. Check it when performance changes and replace it when necessary. The correct carbon reference is 110C / 25110C; the NanoSkim 90 uses a different cartridge. The matching NanoSkim 40 sponge is 110S, the impeller is 110I and its replacement airstone reference is 50031-A. Check the exact part reference before ordering a spare.

Frequently asked questions

Does the NanoSkim 40 need a sump?

No. It is designed to hang on the aquarium side or rear and can be used on suitable marine nano aquariums without a sump.

Are the air pump and water pump included?

Yes. Both pumps are included with the complete NanoSkim 40 assembly, along with its operating media and air components.

Can I use it as a freshwater aquarium filter?

The manufacturer specifies marine use. Choose filtration designed for freshwater aquariums for a freshwater tank.

Which replacement carbon does it use?

Choose NanoSkim 40 carbon reference 110C, manufacturer code 25110C. The 111C cartridge belongs to the NanoSkim 90.

Browse our aquarium filters and filter media or explore the wider aquarium equipment range.

Aqua One NanoSkim 40 Marine Protein Skimmer Reviews

Reviews

There are no reviews yet.

Be the first to review “Aqua One NanoSkim 40 Marine Protein Skimmer”