Aqua One 150W Glass Aquarium Heater

SKU: A11305
GTIN: 9325136030044
Brand

Power

150 W

Aquarium guide

Up to 150 litres; manufacturer selection guide

Length

20.5 cm

Temperature

20–34°C

Aqua One 150 W glass heater, article 11305, with a 20.5 cm body and an adjustable 20–34°C thermostat, heating indicator and fully submersible design. Manufacturer aquarium guide: up to 150 litres. One heater is supplied.

£18.78 (inc VAT)

Aqua One 150 W Glass Aquarium Heater

The Aqua One 150 W Glass Heater combines an adjustable thermostat, a clear temperature scale and a heating indicator in a submersible glass design. The setting range is 20–34°C, and Aqua One gives an aquarium guide of up to 150 litres. This is manufacturer article 11305, with a body length of 20.5 cm.

It is a straightforward way to provide controlled warmth in a tropical freshwater or marine aquarium. Temperature adjustment is built into the heater. Set it for the requirements of your fish and check the water with an accurate aquarium thermometer, rather than relying on the control scale alone.

Choosing this heater

The 20.5 cm body gives you a useful dimension for planning installation, but also check the water line, surrounding equipment and clearance from the substrate. Choose a position where aquarium water can move past the heater and carry warmth around the tank.

The recommendation for aquariums up to 150 litres is a manufacturer guide. Heating demand depends on the room, the target temperature and how readily the aquarium loses heat. A draughty position or open surface can change the demand even when two aquariums hold the same volume. Consider the overall setup, and monitor the tank after fitting the heater to confirm that the temperature remains suitable through your normal daily routine.

Setting the temperature and checking the result

Use the temperature control to select your required setting, then give the aquarium time to respond before making another change. An accurately placed thermometer helps you judge the temperature of the aquarium water as a whole. Keep it away from the immediate heated area so that it does not simply read a local warm spot.

The operating light comes on while the heater is heating. The thermostat cycles the heating as the water approaches and moves away from the selected setting. If temperatures are uneven, check circulation and placement as well as the setting. A heater cannot compensate for every installation problem, so keeping water moving and checking the result are important parts of reliable temperature control.

Installation and care

Read the current instructions supplied with the heater before installation. Fit the mounting suction cups as directed, position the heater near moving water and keep its glass body clear of gravel and substrate. Maintain the marked minimum water level whenever the heater is powered.

Let the heater acclimatise to the aquarium water before switching it on, following the waiting period in the supplied instructions. Arrange a drip loop in the cable and keep the socket and your hands dry when connecting or disconnecting power.

Disconnect the heater before aquarium maintenance or water changes that could expose it. Allow it to cool as directed before lifting it out or handling the glass. Inspect the body and cable regularly, and do not use a heater with damaged glass, a damaged cord or water inside. Follow the supplied cleaning directions and use the heater indoors.

What is supplied

One Aqua One 150 W glass heater with its integral adjustable thermostat and mounting suction cups is supplied. The thermostat is part of the heater. Follow the instructions supplied with your unit when fitting the mounts and setting it up.

Technical overview

Feature Specification
Brand Aqua One
Article 11305
Power 150 W
Aquarium guide Up to 150 litres; manufacturer selection guide
Length 20.5 cm
Temperature 20–34°C
Control Adjustable integral thermostat
Material Glass
Installation Fully submersible; maintain the marked minimum water level
Indicator Heating/on light
Insulation Double insulation
Water type Tropical freshwater and marine
Supplied One 150 W heater with integral thermostat and mounting suction cups

Photograph: Representative range photograph. One Aqua One 150 W glass heater is supplied; the other wattages shown are not included.

Questions about this heater

What is the manufacturer’s aquarium size guide?

The guide is up to 150 litres. It is a starting point for selection, with room temperature, heat loss and the required water temperature also affecting the heating demand.

What are the power and length of this model?

This is the 150 W heater, article 11305, with a body length of 20.5 cm. Check the available installation space and the heater’s marked water line before use.

Is the temperature adjustable?

Yes. The integral thermostat has a 20–34°C setting range. Set a temperature appropriate for your aquarium and verify it with an accurate thermometer.

Where should I position it?

Follow the supplied instructions and use its suction mounting cups. A position near moving water helps distribute heat; keep the glass body away from gravel and substrate and maintain the marked minimum water level.

Can it be used in saltwater?

The standard glass heater family is suitable for tropical freshwater and marine aquariums. Use it indoors and follow the current instructions supplied with the heater.

How do I remove it for maintenance?

Disconnect the heater before aquarium work and allow it to cool for the period specified in the supplied instructions. Do not lift it from the water while it is powered or still hot.

How many heaters come with this listing?

One 150 W glass heater with its integral thermostat and mounting suction cups is supplied. The photograph shows the wider range; the other wattages pictured are not included.

More aquarium equipment

Explore our aquarium equipment range when planning the rest of your setup.

Aqua One 150W Glass Aquarium Heater Reviews

Reviews

There are no reviews yet.

Be the first to review “Aqua One 150W Glass Aquarium Heater”