Stream Rebuild in Hawkhurst, Kent
Rebuilding the stream and ponds
In May 2023 we rebuilt a 50 metre man made stream in Hawkhurst, Kent. The work included renewing the lining and stonework, clearing and preparing the ponds, repairing the patio and holding tank, and installing filtration, pumps and a floating fountain.
Project overview
- Location: Hawkhurst, Kent
- Project: Rebuilding a 50 metre stream and restoring its ponds
- Materials: New lining, Kentish ragstone and 20 mm ragstone gravel
- Equipment: Drum filtration, circulation pumps and an Oase floating fountain
Relining the stream and restoring the stonework
We relined the stream, edged it with Kentish ragstone rocks and covered the liner with 20 mm ragstone gravel. At the top of the stream we relaid and repointed the patio, and lined the holding tank with fibreglass.
Clearing and preparing the ponds
Both ponds were drained so that we could remove the built up silt. We installed concrete bases and finished them with 20 mm ragstone, continuing the stone finish used along the stream.
Filtration and pump layout
We installed a Burtons TF-1000 Drum Filter with two Aqua Forte 45,000 pumps for pond circulation. A third Aqua Forte 45,000 pump supplies the head of the stream, keeping the stream supply separate from the two pond circulation pumps.
Fountain and evening lighting
The main pond also has an Oase PondJet Eco floating fountain, an Oase RGB light kit and an Oase Inscenio FM-Master wireless controller. These add movement and lighting to the water feature.
Discuss a stream or pond restoration
If you are planning work on an existing water feature, our pond building service is a useful starting point. You can also browse our other pond projects or use the enquiry form below to tell us about your pond or stream.
Contact Us
Please get in touch to discuss your pond needs and we will get back to you as soon as possible.
matt@thatpondguy.co.uk
07368 372129











