TMC Pure 50 RO System

SKU: TM5851
GTIN: 5027656233809
Rated output

Up to 190 litres per day

Filter stages

3

Dimensions

350 Ă— 150 Ă— 385 mm

TMC Pure 50 three stage aquarium reverse osmosis system. Up to 190 litres per day under the rated conditions, with an integral pressure gauge.

£107.99 (inc VAT)

The standard TMC Pure 50 is a three stage reverse osmosis unit for preparing aquarium water. It is rated for up to 190 litres per day, equal to about 50 US gallons per day. It includes the model-specific membrane and an integral pressure gauge for monitoring the system.

Choosing the output capacity

Allow enough time to collect the amount of water you use for salt mixing, top-ups or water changes. The rating is based on the manufacturer’s test conditions of 25°C and 50 psi, about 3.5 bar. Lower temperatures and weaker feed pressure can reduce production. Check the conditions in the location you plan to use before deciding between the Pure 50 and Pure 100.

The three filter stages

The first stage uses the 5 micron sediment cartridge. Water then passes through activated carbon before reaching the reverse osmosis membrane. This model uses the 50 GPD replacement membrane, TMC part 5858. The built-in pressure gauge is useful when checking feed conditions and servicing the unit.

Planning the installation

Measure the location before ordering and leave room underneath to remove the filter housings. Plan the feed, RO water and reject water routes, then fit the unit and check connections using the supplied manual. The maker includes three lengths of colour-coded quarter-inch tubing, the feed and drain fittings and a housing tool.

Monitoring performance after installation

Use the manufacturer’s commissioning and flush instructions. Record how much water the unit produces in your conditions and check the output during routine servicing. A compatible in-line meter and a separate deionising stage are optional accessories.

Technical overview

Specification Details
Brand Tropical Marine Centre
System Standard three stage reverse osmosis
Rated output Up to 190 litres per day (50 US GPD)
Rating basis 25°C and 50 psi, about 3.5 bar
Dimensions (W Ă— D Ă— H) 350 Ă— 150 Ă— 385 mm
Membrane part 5858
Supplied Unit with sediment and carbon cartridges, membrane, pressure gauge, tubing, feed and drain fittings and housing tool

Common questions

Will I always get the stated output?

Up to 190 litres per day is the published capacity at the stated conditions. Water temperature and mains pressure can change the output you collect.

Does this model have a TDS meter?

This is the standard Pure model with the integral pressure gauge. The in-line TDS meter is a separate accessory.

Which membrane fits this system?

The matched Pure 50 replacement membrane is TMC article 5858. Check the exact code when replacing it.

What sizes are the supplied water lines?

The manual lists a 2 metre length of quarter-inch tubing for each of the feed, RO water and reject water lines.

Browse aquarium water care and testing.

TMC Pure 50 RO System Reviews

Reviews

There are no reviews yet.

Be the first to review “TMC Pure 50 RO System”