The standard TMC Pure 100 is a three stage reverse osmosis unit for preparing aquarium water. It is rated for up to 380 litres per day, equal to about 100 US gallons per day. It includes the model-specific membrane and an integral pressure gauge for monitoring the system.
Choosing the output capacity
Allow enough time to collect the amount of water you use for salt mixing, top-ups or water changes. The rating is based on the manufacturer’s test conditions of 25°C and 50 psi, about 3.5 bar. Lower temperatures and weaker feed pressure can reduce production. Check the conditions in the location you plan to use before deciding between the Pure 50 and Pure 100.
The three filter stages
The first stage uses the 5 micron sediment cartridge. Water then passes through activated carbon before reaching the reverse osmosis membrane. This model uses the 100 GPD membrane, TMC part 5860. The built-in pressure gauge is useful when checking feed conditions and servicing the unit.
Planning the installation
Measure the location before ordering and leave room underneath to remove the filter housings. Plan the feed, RO water and reject water routes, then fit the unit and check connections using the supplied manual. The maker includes three lengths of colour-coded quarter-inch tubing, the feed and drain fittings and a housing tool.
Monitoring performance after installation
Use the manufacturer’s commissioning and flush instructions. Record how much water the unit produces in your conditions and check the output during routine servicing. A compatible in-line meter and a separate deionising stage are optional accessories.
Technical overview
| Specification | Details |
|---|---|
| Brand | Tropical Marine Centre |
| System | Standard three stage reverse osmosis |
| Rated output | Up to 380 litres per day (100 US GPD) |
| Rating basis | 25°C and 50 psi, about 3.5 bar |
| Dimensions (W Ă— D Ă— H) | 350 Ă— 150 Ă— 385 mm |
| Membrane part | 5860 |
| Supplied | Unit with sediment and carbon cartridges, membrane, pressure gauge, tubing, feed and drain fittings and housing tool |
Common questions
Will I always get the stated output?
Up to 380 litres per day is the published capacity at the stated conditions. Water temperature and mains pressure can change the output you collect.
Does this model have a TDS meter?
This is the standard Pure model with the integral pressure gauge. The in-line TDS meter is a separate accessory.
Which membrane fits this system?
The matched Pure 100 replacement membrane is TMC article 5860. Check the exact code when replacing it.
What sizes are the supplied water lines?
The manual lists a 2 metre length of quarter-inch tubing for each of the feed, RO water and reject water lines.




Reviews
There are no reviews yet.