NT Labs ProCare Substrate Sculptor 25 cm Aquarium Tool

SKU: NT527
GTIN: 0733809005272
Length

25 cm

Material

Blue coated stainless steel

Tool type

Substrate sculptor

A 25 cm blue coated stainless steel tool for shaping, levelling and smoothing the aquarium bed around rocks, wood and plants.

£15.89 (inc VAT)

The NT Labs ProCare Substrate Sculptor helps you shape the bed of a planted aquarium before or after it is filled. At 25 cm long, it reaches into areas between hardscape pieces while you hold the handle clear of the bed. The broad working edge levels open areas of fine gravel, sand or aquasoil and the smaller end can reach tighter spaces.

Levelling open substrate

Start with the larger end when you want a uniform surface. Sweep lightly across the top in overlapping passes, checking the line against the front of the aquarium. In new aquascapes, this makes it easier to build a deliberate slope with a lower foreground and room for taller planting at the back.

Shaping around hardscape

Use the narrower end where rocks and wood leave little room to work. You can push loose grains back into a corner or refine the edge of a path without dragging larger pieces through the gravel. Take care near roots and freshly planted stems.

Making small adjustments in a filled aquarium

Work slowly to avoid stirring up fine particles. The tool is intended for moving and levelling substrate. It does not extract waste like a siphon. If you are tidying after a water change, use gentle strokes and check that the blades clear the tank surfaces.

Cleaning and storing the tool

Rinse off trapped sand and gravel with clean water after use, dry the tool and store it where the edges will stay clear. The tool is made of blue coated stainless steel with the NT Labs etched mark. Its finish can be kept clean with a soft cloth.

Technical overview

Specification Details
Brand NT Labs
Range ProCare Aquascaping Tools
Use Flattening, positioning and shaping aquarium substrate
Length 25 cm
Material Blue coated stainless steel
Included One substrate sculptor
Manufacturer article 527

Common questions

Can I use it on sand?

Yes. Use light strokes with the broad end to level open sand. It can also move soil or fine gravel.

Is the tool supplied on its own?

Yes. This is one ProCare Substrate Sculptor.

How is this different from a gravel cleaner?

The sculptor moves and shapes the substrate in place. Use a separate siphon if you need to remove debris.

How long is the sculptor?

The tool is 25 cm long.

Browse aquarium cleaning and maintenance.

NT Labs ProCare Substrate Sculptor 25 cm Aquarium Tool Reviews

Reviews

There are no reviews yet.

Be the first to review “NT Labs ProCare Substrate Sculptor 25 cm Aquarium Tool”