Interpet Nano Stat 25W Fixed Temperature Aquarium Heater

SKU: IP51529
GTIN: 755349515295
Brand

Power

25 W

Temperature

Preset 25°C

Aquarium guide

Up to 25 litres, in rooms above 20°C with water movement

Size (H×W×D)

16 × 2.3 × 3 cm (assembled)

Interpet Nano Stat 25 W heater with a fixed 25°C thermostat. Manufacturer guide: up to 25 litres in rooms above 20°C with water movement. Assembled H×W×D: 16 × 2.3 × 3 cm. One heater with its fitted plug and mounting suckers is supplied; keep the power supply dry.

£23.99 (inc VAT)

Interpet Nano Stat 25 W Aquarium Heater

The Interpet Nano Stat 25 W provides fixed temperature control for a small tropical aquarium. Its integral thermostat turns heating on and off around a preset 25°C. Interpet’s manual gives the 25 W model an aquarium guide of up to 25 litres, subject to suitable room conditions and water movement.

It suits an aquarium whose inhabitants need a temperature of 25°C and where you want preset control. The thermostat setting is not user adjustable. Use a separate accurate thermometer to check the actual water temperature, including after changes to the aquarium’s position or circulation.

Choosing the right model and position

The manual advises that a room at 20°C or below can prevent the heater reaching 25°C. Use the Nano Stat in a room above 20°C, with adequate moving water around it. Consider those conditions together with the aquarium’s water volume instead of treating the 25 litre figure as a guarantee for every installation.

The assembled unit is listed as 16 × 2.3 × 3 cm, in height, width and depth order. Allow enough space to secure and fully submerge the heater as instructed. The smaller 10 W Nano Stat has a manual guide of up to 12 litres; both models share the 25°C preset, so choose according to the appropriate size guide and the conditions in your room.

Keep the heater wet and the power supply dry

Follow the current instructions supplied with your heater. The heater unit must remain fully submerged up to its power cord whenever it is in use. Mount it at an angle on the aquarium side using the suckers provided, with water moving past it. A suitable rear filter compartment is another position described in the manual, provided the unit stays secured and submerged.

The power supply that plugs into the mains is not waterproof. Keep it dry and secure so it cannot fall into the aquarium, and arrange the mains cable with a drip loop. Keep the heater clear of prolonged contact with the aquarium base or sides. Avoid direct sunlight, nearby heat sources and unsuitable positions beneath air conditioning.

Protection, temperature checks and care

Interpet specifies a run dry protection sensor. Continue to follow the immersion instructions and disconnect the heater before a water change or removal; the protection feature does not make operation out of the water an intended use. Check the aquarium temperature with a thermometer rather than assuming the preset alone confirms the conditions your fish are experiencing.

Switch off and allow the heater to cool for the period in the supplied instructions before removing or handling it. Clean the body as directed using a damp cloth, without cleaning agents that could enter the aquarium. Replace mounting suckers when they no longer hold securely. Do not use the unit if its cable or plug is damaged, if the plug is wet or if the unit appears to malfunction.

What is supplied

One Interpet Nano Stat 25 W heater with its fitted plug is supplied, together with the mounting suckers described in the instructions. The temperature control is built into the heater.

Guarantee

The manufacturer’s manual states a 12 month guarantee against defects in material and workmanship under normal use, subject to its conditions and exclusions. Replaceable suction cups are excluded. The guarantee does not affect your statutory rights.

Technical overview

Feature Specification
Brand Interpet
Article 51529
Power 25 W
Temperature Preset 25°C
Aquarium guide Up to 25 litres, in rooms above 20°C with water movement
Control Fixed integral thermostat
Size (H×W×D) 16 × 2.3 × 3 cm (assembled)
Heater position Fully submerged to the power cord
Power supply Not waterproof; keep dry and secure
Protection Run dry protection sensor
Mounting Supplied suction mounting suckers
Use Indoor tropical aquariums
Supplied One heater with fitted plug and mounting suckers
Guarantee 12 months under normal use, subject to the manufacturer’s terms

Photograph: Representative packaging photograph. One Interpet Nano Stat 25 W heater with its fitted plug is supplied.

Questions about this heater

Can I change the temperature setting?

No. The Nano Stat 25 W has a fixed 25°C thermostat. Choose it only when that temperature is suitable for the fish and plants you keep.

What size aquarium is this model intended for?

The manual gives a guide of up to 25 litres. Use it in a room above 20°C with adequate water movement. The manual warns that a room at 20°C or below can prevent it reaching 25°C.

Which parts can go underwater?

The heater unit must be fully submerged up to its power cord. The power supply that plugs into the mains is not waterproof and must stay dry and secure, with a drip loop in the cable.

Does the run dry sensor let me use it out of water?

No. It is a protection feature. The heater still needs the specified immersion, and you should disconnect it before lowering the water level or removing it. Follow the current instructions supplied with the unit.

What comes with the heater?

One 25 W heater with its fitted plug and mounting suckers is supplied. The thermostat is integral to the heater. The representative packaging photograph shows the selected 25 W model.

How should I remove and clean it?

Disconnect the power and allow the heater to cool as directed before removal. Wipe the cooled body with a damp cloth and do not use cleaning agents that could enter the aquarium. Replace suckers that lose their hold.

Do I still need to check the water with a thermometer?

Yes. A separate accurate aquarium thermometer lets you check the actual water temperature. Recheck after installation and after changes to room conditions, the aquarium’s position or water movement.

More aquarium equipment

Explore our aquarium equipment range when planning the rest of your setup.

Interpet Nano Stat 25W Fixed Temperature Aquarium Heater Reviews

Reviews

There are no reviews yet.

Be the first to review “Interpet Nano Stat 25W Fixed Temperature Aquarium Heater”