Interpet Nano Stat 10W Fixed Temperature Aquarium Heater
| Brand | |
|---|---|
| Power | 10 W |
| Temperature | Preset 25°C |
| Aquarium guide | Up to 12 litres, in rooms above 20°C with water movement |
| Size (H×W×D) | 14.5 × 2.3 × 2.6 cm (assembled) |
Interpet Nano Stat 10 W heater with a fixed 25°C thermostat. Manufacturer guide: up to 12 litres in rooms above 20°C with water movement. Assembled H×W×D: 14.5 × 2.3 × 2.6 cm. One heater with its fitted plug and mounting suckers is supplied; keep the power supply dry.
£21.99 (inc VAT)
Interpet Nano Stat 10 W Aquarium Heater
The Interpet Nano Stat 10 W is a compact heater with a fixed 25°C thermostat for a small tropical aquarium. The thermostat switches the heating on and off to maintain its preset temperature. The manufacturer’s manual gives this model a guide of up to 12 litres, with suitable room conditions and water movement.
Choose it for fish and plants whose requirements suit a 25°C aquarium. The temperature is preset rather than adjustable, so you do not have a temperature dial to set. Check the actual aquarium temperature with a separate accurate thermometer as part of normal care.
Choosing the right model and position
Use the 12 litre guide alongside the conditions around your aquarium. The manual identifies a room at 20°C or below as a reason the heater may fail to reach 25°C. Use it in a room above 20°C and provide adequate water movement around the heater. Tank volume alone does not guarantee the temperature you will achieve.
The manufacturer lists assembled dimensions of 14.5 × 2.3 × 2.6 cm, in height, width and depth order. Check that the heater can be correctly submerged and secured in your aquarium. If comparing models, the Nano Stat 25 W has the same 25°C preset and a larger manual aquarium guide of up to 25 litres; the room and circulation conditions still apply.
Keep the heater wet and the power supply dry
Follow the current instructions supplied with your heater. The heater unit must remain fully submerged up to its power cord whenever it is in use. Mount it at an angle on the aquarium side using the suckers provided, with water moving past it. A suitable rear filter compartment is another position described in the manual, provided the unit stays secured and submerged.
The power supply that plugs into the mains is not waterproof. Keep it dry and secure so it cannot fall into the aquarium, and arrange the mains cable with a drip loop. Keep the heater clear of prolonged contact with the aquarium base or sides. Avoid direct sunlight, nearby heat sources and unsuitable positions beneath air conditioning.
Protection, temperature checks and care
Interpet specifies a run dry protection sensor. Continue to follow the immersion instructions and disconnect the heater before a water change or removal; the protection feature does not make operation out of the water an intended use. Check the aquarium temperature with a thermometer rather than assuming the preset alone confirms the conditions your fish are experiencing.
Switch off and allow the heater to cool for the period in the supplied instructions before removing or handling it. Clean the body as directed using a damp cloth, without cleaning agents that could enter the aquarium. Replace mounting suckers when they no longer hold securely. Do not use the unit if its cable or plug is damaged, if the plug is wet or if the unit appears to malfunction.
What is supplied
One Interpet Nano Stat 10 W heater with its fitted plug is supplied, together with the mounting suckers described in the instructions. The temperature control is built into the heater.
Guarantee
The manufacturer’s manual states a 12 month guarantee against defects in material and workmanship under normal use, subject to its conditions and exclusions. Replaceable suction cups are excluded. The guarantee does not affect your statutory rights.
Technical overview
| Feature | Specification |
|---|---|
| Brand | Interpet |
| Article | 51528 |
| Power | 10 W |
| Temperature | Preset 25°C |
| Aquarium guide | Up to 12 litres, in rooms above 20°C with water movement |
| Control | Fixed integral thermostat |
| Size (H×W×D) | 14.5 × 2.3 × 2.6 cm (assembled) |
| Heater position | Fully submerged to the power cord |
| Power supply | Not waterproof; keep dry and secure |
| Protection | Run dry protection sensor |
| Mounting | Supplied suction mounting suckers |
| Use | Indoor tropical aquariums |
| Supplied | One heater with fitted plug and mounting suckers |
| Guarantee | 12 months under normal use, subject to the manufacturer’s terms |
Photograph: Representative packaging photograph. One Interpet Nano Stat 10 W heater with its fitted plug is supplied.
Questions about this heater
Can I change the temperature setting?
No. The Nano Stat 10 W has a fixed 25°C thermostat. Choose it only when that temperature is suitable for the fish and plants you keep.
What size aquarium is this model intended for?
The manual gives a guide of up to 12 litres. Use it in a room above 20°C with adequate water movement. The manual warns that a room at 20°C or below can prevent it reaching 25°C.
Which parts can go underwater?
The heater unit must be fully submerged up to its power cord. The power supply that plugs into the mains is not waterproof and must stay dry and secure, with a drip loop in the cable.
Does the run dry sensor let me use it out of water?
No. It is a protection feature. The heater still needs the specified immersion, and you should disconnect it before lowering the water level or removing it. Follow the current instructions supplied with the unit.
What comes with the heater?
One 10 W heater with its fitted plug and mounting suckers is supplied. The thermostat is integral to the heater. The representative packaging photograph shows the selected 10 W model.
How should I remove and clean it?
Disconnect the power and allow the heater to cool as directed before removal. Wipe the cooled body with a damp cloth and do not use cleaning agents that could enter the aquarium. Replace suckers that lose their hold.
Do I still need to check the water with a thermometer?
Yes. A separate accurate aquarium thermometer lets you check the actual water temperature. Recheck after installation and after changes to room conditions, the aquarium’s position or water movement.
More aquarium equipment
Explore our aquarium equipment range when planning the rest of your setup.




Reviews
There are no reviews yet.