Hanna Multiparameter Waterproof Meter (pH, ORP, DO, Pressure & Temperature) – HI-98196
| Brand | |
|---|---|
| Model | HI-98196 |
| Supplied probe | HI7698196/4 |
| Sensors | HI7698194-1 pH/ORP; HI7698194-2 galvanic dissolved oxygen |
| Probe cable | 4 m |
| Conductivity channel | Not included |
| Logging | Up to 45,000 records |
| Log interval | 1 second–3 hours |
| Protection | IP67 meter; IP68 probe |
Portable HI98196 multiparameter meter with 4 m probe: pH/ORP, galvanic DO and temperature; no conductivity sensor.
£1,687.99 (inc VAT)
Hanna HI98196 pH and Dissolved Oxygen Multiparameter Meter
Choose the sensor combination around the work
The HI98196 is the pH/ORP and dissolved-oxygen version of this portable Hanna multiparameter family. It records those measurements, temperature and atmospheric pressure using the supplied 4 m probe system. It does not add a conductivity sensor.
| Specification | Details |
|---|---|
| Supplied probe | HI7698196/4 |
| Supplied sensor modules | HI7698194-1 pH/ORP; HI7698194-2 galvanic dissolved oxygen |
| Probe cable | 4 m |
| Conductivity channel | Not included |
| Dissolved-oxygen channel | Galvanic membrane sensor |
| Logging capacity | Up to 45,000 records |
| Logging interval | 1 second–3 hours |
| Meter / probe protection | IP67 meter; IP68 probe |
What the readings mean
This version does not measure conductivity, TDS or salinity. Use the appropriate salinity-compensation setting for dissolved-oxygen work where required by the method, rather than assuming a conductivity reading is available.
The dissolved-oxygen module is a galvanic membrane sensor, not an optical oxygen sensor. It needs the correct membrane and electrolyte, preparation and calibration. Follow the probe procedure for sample movement and stable readings; a clean, correctly prepared membrane matters.
ORP is a redox reading in millivolts, not a direct free-chlorine concentration. The system also does not provide ammonia or nitrite tests simply because several water values appear on screen.
Calibration, logging and sampling
Calibrate the installed sensors with the recognised standards and use the appropriate quick or full calibration procedure for the task. Save the units, sampling location and relevant conditions with the readings. The supplied USB connection supports transfer using Hanna’s software; confirm current PC requirements before relying on a particular computer setup.
The probe family has a 20 m immersion rating, but this listing’s 4 m cable limits practical reach. Longer-cable variants are separate packages. Keep the hand-held meter and connector within their own operating and protection limits.
Supplied equipment and alternatives
The manufacturer package includes the meter, listed probe and sensor modules, maintenance kit, calibration beaker, USB cable, batteries, carrying case and documentation. Check the current supplied consumables and standards before ordering replacements, as membrane and electrolyte requirements depend on the sensor type.
For combined conductivity and oxygen measurements, compare the HI98194 system.
Reviews
There are no reviews yet.