Aquascape Pond Powerhead

Aquascape Pond Powerhead

Create water movement and eliminate stagnant areas in ponds and water gardens, providing surface agitation and aeration. This standalone pump does not require any pipe or plumbing. Simply set the powerhead directly in the pond or disguise it in the pond using rocks or other materials. The energy-efficient, low-voltage motor can be powered by a standard outdoor 12-volt transformer (not included). Aquascape warrants that the Pond Powerhead will be free of manufacturing defects for three years from date of purchase.

Warranty does not cover damage resulting from electrical supply problems, improper wiring, lightning, negligent handling, misapplication, misuse, or lack of reasonable maintenance or care. Warranty does not cover parts subject to normal wear, such as impellers. This product should only be operated in fresh water, completely submerged, without corrosive chemicals like chlorine or bromine.

Key features and benefits

• Increases water circulation and movement in areas with low water flow
• Simply set in the pond – no pipe or plumbing required
• Prevents buildup of unsightly decaying debris
• Powered by a standard 12-volt transformer (not included)
• 3-Year Limited Warranty

Product specifications

Use the values for Aquascape part number 91142; related sizes and visually similar service parts may have different specifications.

Where the Pond Powerhead is useful

This is a standalone water circulator for areas of the pond where movement is limited. Its adjustable head directs the water where it is needed, without connecting it to a pipe, waterfall or filter. Position it fully submerged and keep its intake clear. The maximum-flow figure is a circulation specification, not a flow available through plumbing.

Power supply and cables

The Powerhead uses 40W at 12V and does not include a transformer. Aquascape’s UK catalogue specifies a transformer rated above 40W. Our Aquascape 60W low-voltage transformer is the appropriate capacity to consider for one Powerhead; include every connected load when planning a shared supply. The 6W and 12W transformers are too small for this unit.

The UK catalogue lists a 6.6m lead. Where additional reach is needed, use the matching Aquascape low-voltage extension cable. Confirm the complete circuit and follow the manufacturer’s installation instructions; do not substitute the four-pin colour-changing lighting cables.

For pumps that feed pipework, filters or waterfalls, see our Aquascape pond and waterfall pumps. Find other replacement components in pump spares and accessories.