Aquascape Fountain Bowl Hanging Planter – Round
| Brand | |
|---|---|
| Product Type | |
| Application | |
| Works With | Fountain System |
This round hanging planter adds a planting pocket to the rim of a compatible Aquascape Fountain Bowl. It is a separate container for the edge of the water feature, giving trailing leaves somewhere to grow without putting another full-size pot in the centre of the bowl. Aquascape identifies this version as part 78413.
£26.99 (inc VAT)
Aquascape Fountain Bowl Hanging Planter – Round
A planting pocket for the edge of a compatible round Fountain Bowl
This round hanging planter adds a planting pocket to the rim of a compatible Aquascape Fountain Bowl. It is a separate container for the edge of the water feature, giving trailing leaves somewhere to grow without putting another full-size pot in the centre of the bowl. Aquascape identifies this version as part 78413.
Match the curved profile to the round bowl before planning the planting. One planter can make a small focal point, while several can give a softer outline around the rim. Leave the water, fountain outlet and any existing plants enough room rather than filling every available edge.
The planter is made from GFRC and comes with its securing fasteners. The fountain bowl, plants and planting materials are separate purchases. A planted example shows the effect you can create, rather than a promise that the pictured plants or a complete water feature are included.
Check the exact bowl model as well as its shape. These hanging planters do not fit the 24in (61 cm), 50in (127 cm) or 60in (152 cm) Fountain Bowls. A similar-looking rim on a different bowl does not establish compatibility, so check the intended mounting arrangement before ordering.
Fit the planter using the instructions for the actual bowl. Mark any required fixing positions carefully, support the rim and use the supplied hardware. Where the manufacturer’s method involves drilling fibreglass, wear eye protection and a suitable mask. Do not improvise a fixing through a cracked or damaged edge.
Choose plants for the light, moisture and space available in the pocket. Trailing planting can soften the rim, but the roots still need appropriate growing medium and care. Check drainage and keep access to the fasteners. A filled planter is heavier than an empty one, so support it carefully when arranging the planting or maintaining the bowl.
What you receive
One Aquascape round Fountain Bowl Hanging Planter, part 78413, with its securing fasteners. The fountain bowl, pump, plants and growing medium are separate, so this is an accessory for a compatible existing feature rather than a complete planted fountain.
Check the exact bowl model before ordering. The manufacturer excludes the 24-inch, 50-inch and 60-inch Fountain Bowls from this accessory’s compatibility; choose the matching planter profile as well as the right bowl size.
Choosing the right accessory
- The matching round Aquascape Fountain Bowl, after checking its model and rim.
- Optional trailing or compact planting where the plant suits the site.
- A rim and fixing arrangement that remain accessible for maintenance.
Fitting and planting the hanging pocket
Confirm that your Fountain Bowl accepts the round hanging planter and use that bowl’s installation instructions. Position the empty pocket first so you can check the mounting points, water route and access before adding any planting weight. Do not treat a close-looking rim as proof of compatibility.
Use the supplied securing fasteners and the manufacturer’s fixing arrangement. Where the bowl instructions require drilling, follow their hole positions and method and use appropriate eye and dust protection. Check the bowl and planter for damage before fixing a loaded planting to the rim.
Keep the drainage holes open and select a plant and growing medium suited to the pocket’s actual moisture conditions. A planter attached to a fountain is not automatically a constantly flooded marginal basket. Leave enough access to check the roots, water the plant if needed and inspect the fixings without dismantling the whole feature.
Looking after the planter
- Check the mounting: Inspect the rim, fasteners and pocket during normal feature care, particularly after lifting or changing the planting. Support the pocket before releasing any fixing so its wet contents are not left hanging from one remaining point.
- Keep drainage accessible: Clear fallen leaves and other debris from the small drainage holes. Check how the planting behaves after watering rather than assuming that every pocket on the feature receives the same amount of moisture.
- Manage the plant: Choose for the available root space and the light at the bowl. Trim or replace a plant that becomes too large, and follow its own feeding and winter needs; the empty planter has no universal care routine for every species.
- Prepare for cold weather: Follow the fountain bowl and pump instructions when winterising the feature. Check for trapped water in fittings and deal with the chosen plants separately if they need protection.
Product details
- Manufacturer part
- 78413
- Version
- Round Fountain Bowl Hanging Planter
- Construction
- GFRC
- Included
- One hanging planter with its securing fasteners
- Compatibility
- Matching compatible Aquascape Fountain Bowl; not 24in (61 cm), 50in (127 cm) or 60in (152 cm) bowls
- Plants and bowl
- Separate purchases
- Drainage
- Two small holes described in the bowl installation instructions
Delivery information
Please read our delivery information for delivery arrangements and contact us if you need to check the timing of a particular order.
Related planting supplies
square hanging planter — The alternative shape for the matching Fountain Bowl profile; check its own compatibility.
replacement hanging-planter fasteners — Spare hardware; the complete new planter already includes its fasteners.
Aquascape Plant & Fish Care — Browse planting media and care products for the plants you choose.
Aquascape Pond Kits — Explore complete kits when planning a new pond installation.



Reviews
There are no reviews yet.