Aquascape Clean for Ponds SL – 1 L

Aquascape Clean for Ponds SL – 1 L

A bacteria-based treatment for organic waste such as fish waste, uneaten food and accumulated debris.

Using this treatment

Measure the water volume, identify the problem and read the current product label before dosing. Check the instructions when refilling or changing products; pack volume alone does not establish how long a treatment will last. Keep physical debris removal and normal filter maintenance in your routine.

Browse dosing systems and other water treatments.

Targeting organic waste and sludge

Clean for Ponds is a bacteria-based treatment aimed at organic material from fish waste, uneaten food and decomposing leaves. It is particularly relevant around rocks, gravel and other places where a little debris can be difficult to remove during normal maintenance.

The formula helps break down organic waste; it is not a substitute for removing a thick layer of leaves or servicing a blocked filter. Taking out the bulk of the debris first reduces the load on the pond and gives the regular maintenance treatment a more sensible job to do.

Use it as part of a routine that includes good circulation and aeration. If fish are distressed or test readings are abnormal, investigate those conditions promptly rather than assuming that adding a sludge treatment will correct the cause.

Choosing and fitting an SL refill

This is the UK 1-litre SL refill for the Aquascape Dosing System SL. The dosing unit is bought separately. Check the SL marking on both the system and bottle: a matching formula name on an XT bottle or an older pouch is not a confirmation that it will fit.

Set the controller using the measured volume of the water feature and the current SL chart. Check the intake is seated correctly, the delivery tube is not kinked and the system has been primed as instructed. Inspect the bottle level during routine maintenance rather than relying on a calendar estimate alone.