2 Inch 45° Obtuse Pipe Bend

2 Inch 45° Obtuse Pipe Bend

A 45° obtuse pipe bend for compatible pond pipework

This 2-inch nominal 45-degree obtuse bend is listed for changing the direction of a compatible pond pipe run.

Product details

• Listed size: 2 inch
• Part: 45° obtuse pipe bend
• Application: compatible pond pipework

Match the connection

Match the joint system and actual diameter before comparing with an existing 50mm waste fitting. The angle and end connections should suit the route and the pipe already installed. Identify the complete pipe system as well as the nominal size; pressure, waste, solvent and push-fit fittings are not interchangeable simply because their labels sound alike.

Planning and installation

Set out the turn, support the pipe and check the finished connection before it is concealed.

Compare the fitting’s complete shape and connections with the pipe and equipment it needs to join before making a permanent alteration.

Related products

Browse pond hose and pipework. Check the connection type, measured size and pipe standard before choosing fittings.