Aquascape Pond Lighting & Power
Light the water, planting and stone after dark
Aquascape lighting lets you highlight a waterfall, illuminate a fountain or pick out planting beside the pond. Choose the lighting family first: warm-white fittings, colour-changing fittings and Aquascape x in-lite products have different connection and control arrangements. Then plan the transformer, cable route and mounting position around the chosen lights.
Browse warm-white lights for a fixed-colour effect or colour-changing lights for controllable colour. The Aquascape x in-lite BEAM range uses its own EASY-LOCK system; see each model’s current availability before planning a new installation.
Can I mix warm-white and colour-changing accessories?
Do not assume they interchange. Two-pin warm-white, four-pin colour-changing and EASY-LOCK arrangements need their specified components. Use only the manufacturer’s supported adaptors.
Build the electrical system as a set
A spotlight alone is not a complete powered installation. Check the required transformer, any control hub and the correct splitters or extensions. Add up the connected load and stay within every component’s rating. A submerged light body does not mean every cable joint or controller can be submerged.
Aim for the effect you want to see
Position lights so they illuminate moving water and surfaces without shining straight into seating areas. A small lamp close to a cascade may work better than a large lamp aimed across the whole pond. Keep fittings retrievable for cleaning and allow safe, protected cable routes.
Can I add smart control later?
Only where the selected lights and controller support it. Check both the power system and controller family, plus any required network coverage, before buying a hub.
Choose one lighting family before adding accessories
| Family | Connection route | Finish the installation |
|---|---|---|
| Traditional warm white | The specified two-pin quick-connect components. | A correctly rated matching transformer, plus any required extensions and splitters. |
| Colour changing | The specified four-pin colour-changing components. | The required power supply and colour-control equipment for those fixtures. |
| MINI BEAM, BEAM and BIG BEAM | Aquascape x in-lite EASY-LOCK and main system cable. | The appropriate transformer and cable; use the dedicated underwater extension arrangement where a connection will be submerged. |
A fitting’s underwater rating does not automatically apply to every connector, controller or transformer. Follow the installation instructions for each component, and keep the equipment that is not rated for immersion out of the water.
