Aqua One ST3 Electronic Aquarium Thermometer with Probe

Categories:
SKU: A10299
GTIN: 9325136042009
Brand

Units

Celsius and Fahrenheit

Accuracy

±1°C

Sensor

Water-resistant wired probe

Probe lead

90 cm

Size (W×D×H)

6 × 1.5 × 3.7 cm

Aqua One ST3 electronic thermometer 10299 with an external LCD display, a 90 cm wired probe and Celsius/Fahrenheit selection. Manufacturer accuracy: ±1°C. Keep the display outside the water and submerge only the probe. One thermometer with its probe and suction attachment is supplied.

£8.99 (inc VAT)

Out of stock

Out of stock

Aqua One ST3 Electronic Aquarium Thermometer

The Aqua One ST3 is an electronic aquarium thermometer with an external LCD display and a wired probe. The probe sits in the aquarium water while the display remains outside, giving you a temperature reading without putting the display unit in the tank.

Choose between Celsius and Fahrenheit to match the temperature guidance you use. Aqua One lists the ST3 for coldwater, tropical and marine aquariums. It is useful for checking the actual water conditions alongside a heater or as part of the care of an aquarium that does not require heating.

Plan the display and probe position

The probe lead is 90 cm long. Check the route from your chosen display position to the water before fitting it, leaving the lead arranged safely rather than stretched tight. The overall display dimensions are 6 cm wide, 1.5 cm deep and 3.7 cm high, so you can check the space available on the outside of the aquarium.

Use the maker-described suction attachment to secure the display outside the aquarium and position the probe in the water you want to monitor. Keep the display visible for routine checks. The 90 cm figure describes the probe lead, not a mains power cable.

Keep the display dry

Only the probe is water resistant. Submerge the probe in the aquarium and keep the LCD display outside the water. Do not submerge the display unit or treat the whole thermometer as a waterproof device.

Press the FSW button to switch the unit on. To switch it off, press and hold the button for three seconds. Slide the °C/°F switch to select the temperature unit you prefer.

Understand the reading

Aqua One states an accuracy of ±1°C and an operating-temperature specification of −10°C to +50°C. The operating specification is an equipment rating, not a recommended water temperature for your fish. Choose the aquarium temperature to suit the animals you keep.

Use the thermometer to monitor the water rather than assuming a heater setting confirms the temperature throughout the aquarium. Check readings after installation and when you alter the setup. The ST3 provides a reading; it is not a heater controller.

Care and battery safety

Follow the instructions supplied with the thermometer for routine care and battery handling. Keep the display dry, check that the suction attachment holds and avoid damaging the probe lead when moving equipment or replacing the aquarium cover.

Read and follow the supplied button battery warnings. Keep new and used button cells away from children, and handle replacement and disposal as directed for the product.

What is supplied

One Aqua One ST3 electronic thermometer with its external display, wired probe and suction attachment is supplied. Keep the probe in the aquarium water and the display outside when setting it up.

Technical overview

Feature Specification
Brand Aqua One
Article 10299
Model ST3
Display LCD
Units Celsius and Fahrenheit
Accuracy ±1°C
Operating temperature −10°C to +50°C (manufacturer specification)
Display position Outside the water
Sensor Water-resistant wired probe
Probe lead 90 cm
Size (W×D×H) 6 × 1.5 × 3.7 cm
Use Coldwater, tropical and marine aquariums
Mounting Suction attachment
Supplied One thermometer with wired probe and suction attachment

Photograph: Aqua One ST3 thermometer pictured. One thermometer with its wired probe is supplied; keep the display outside the water.

Questions about this thermometer

Can I put the whole ST3 in the water?

No. Submerge only the water resistant probe. The LCD display attaches outside the aquarium and must remain outside the water.

How accurate is it?

Aqua One states an accuracy of ±1°C. Use the reading to monitor the aquarium and compare it with the temperature suitable for your fish; the thermometer does not control the heater.

Does it show Celsius and Fahrenheit?

Yes. Slide the °C/°F switch to select the unit you want. Use the same unit when comparing the reading with your aquarium temperature guidance.

How long is the probe lead?

The manufacturer lists a 90 cm probe lead. Check that it reaches from the external display position to the water without being stretched tight. This is the sensor lead, not a mains cable.

Is it suitable for a marine aquarium?

Yes. Aqua One lists this ST3 model for marine, tropical and coldwater aquariums. Keep only the probe in the water and the display outside in every setup.

How do I turn it on and off?

Press the FSW button to turn it on. Press and hold that button for three seconds to turn it off. Temperature-unit selection is made with the °C/°F switch.

What is included?

One Aqua One ST3 thermometer with its external LCD display, wired probe and suction attachment is supplied. Follow the supplied setup and button battery safety instructions.

More aquarium equipment

Explore our aquarium equipment range when choosing the rest of your setup.

Aqua One ST3 Electronic Aquarium Thermometer with Probe Reviews

Reviews

There are no reviews yet.

Be the first to review “Aqua One ST3 Electronic Aquarium Thermometer with Probe”