Evolution Aqua Nexus 220+ Automatic Cleaning Kit – Gravity Fed
| Brand |
|---|
Automatic cleaning upgrade for gravity-fed Nexus 220+. Nexus filter, water pump and air pump required separately. Check the filter generation and kit version.
£674.95 (inc VAT)
Evolution Aqua Nexus 220+ Automatic Cleaning Kit – Gravity Fed
Automatic cleaning for a gravity-fed Nexus 220+
This kit automates the cleaning cycle on a compatible gravity-fed Nexus 220+. It is an upgrade for an existing filter installation, not a Nexus filter, circulation pump or air pump.
Choose the installation version first
In a gravity-fed installation, water enters the Nexus from the pond by gravity and the circulation pump returns filtered water to the pond. The automatic inlet arrangement must match the Nexus size, which is why the 220 and 320 gravity kits are separate.
Evolution Aqua describes compatibility with Nexus models manufactured after 2006. Check the filter generation, inlet arrangement, waste valve and the kit instructions before ordering for an older Nexus. A matching model number is only part of the compatibility check.
How automatic cleaning works
The control system coordinates the cleaning sequence, air supply, waste valve and circulation-pump switching. Cleaning can be triggered on the programmed interval or by the manual clean control. The purpose is to remove accumulated mechanical waste without having to operate every valve by hand.
The filter still needs the correctly sized air pump and circulation pump. Leave access to the valves and controller and provide a waste route that can take the discharge. The pond loses water when dirty water is released, so plan safe topping-up and check it during commissioning.
| Specification | Details |
|---|---|
| Shop kit code | NEXUSAUTO220G |
| Installation type | Gravity-fed |
| Nexus size for this listing | 220+ |
| Manufacturer generation check | Nexus models manufactured after 2006; verify the exact installation |
| Filter, circulation pump and air pump | Required separately |
| Cleaning | Programmed interval or manual start |
Commissioning and ongoing care
Run and observe a full cleaning cycle after installation. Confirm that pump switching, air movement, isolation and waste discharge work in the correct order, and that normal filtration resumes. Follow the wiring and installation instructions; have electrical work carried out by a suitably qualified person.
Automatic operation does not remove the need to inspect water level, waste discharge, valves and the filter itself. An obstructed waste line or a valve fault can still prevent a successful clean. Check the system when feeding increases or pond conditions change.
Compare the pump-fed kit or the 220+ gravity-fed kit and the 320+ gravity-fed kit as appropriate. The Nexus range lets you compare the upgrades alongside compatible filters.
For more on layout and cleaning, read our guide to Evolution Aqua Nexus pond filters.




Reviews
There are no reviews yet.